No Detail Found!

Fluid dynamic design of a vertical axis wind turbine rotor under low wind speed

Author(s)
Jesús D. Rhenals-Julio Department of Mechanical Engineering, University of Córdoba,Carrera Montería,Colombia
Omar D. Perez Department of Mechanical Engineering, University of Córdoba,Carrera Montería,Colombia
Luis G. Vidal Department of Mechanical Engineering, University of Córdoba,Carrera Montería,Colombia
Arnold Martínez Guarín Department of Mechanical Engineering, University of Córdoba,Carrera Montería,Colombia
Jorge M. Mendoza Department of Mechanical Engineering, University of Córdoba,Carrera Montería,Colombia
Abstract
The design of the rotor geometry of a vertical axis wind turbine (VAWT) type H, for power generation at low wind speeds, is presented. The computational simulation allowed us to establish that the NACA 0018 profile offers a better ratio of lift and drag coefficients in contrast to NACA 0021 and NACA 0025, so this geometry was selected as the working profile. Then, to generate a power of 30W, the dimensions of the airfoil chord, the radius, and the rotor's height were found from the blade tip speed ratio (TSR) values and the power coefficient. The results obtained indicate that the appropriate dimensions of the rotor at low-speed conditions are, a diameter of 2 m, a height of 2.16 m, and several blades of 3, for a rotation speed of 9 rad/s. Finally, an agreement was found between the angular velocity calculated theoretically, for the proposed rotor dimensions, and that obtained from the ANSYS-CFD simulation.
Publication Details
Page(s) 2088-2093
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 18, Year: 2023

Request the full text from PASTIC

Keywords
airfoil, Wind Turbine, VAWT
0

Citations

0

Downloads

57

Views