No Detail Found!

Effect of weight percentage on physical and mechanical properties of coconut shell reinforced polymer composite

Author(s)
K. A. Zakaria Fakulti Teknologi Dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
V. T. Singh Fakulti Teknologi Dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
M. B. Ali Fakulti Teknologi Dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
M. A. Yusuff Fakulti Teknologi Dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
R. Adnan Fakulti Teknologi Dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
A. M. T. Ariffin Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia,Parit Raja, Batu Pahat, Johor,Malaysia
Abstract
The utilization of natural fibers in composites has been increasing and developed to save the environment by using biodegradable materials. Synthetic fiber has many disadvantages than natural fiber such as lower mechanical properties, high cost, and higher environmental risk. Therefore, this study aims to develop natural fiber composites that are reinforced with coconut shell waste and study the effect of weight percentage (wt%) on their physical and mechanical properties. Testing samples were produced from coconut shell reinforced and polyester resin matrix. Coconut shell powder with a particle size of 500 µm and below is randomly distributed into polyster resin matrix. The coconut shell wt% varies from 10% to 30%. The physical and mechanical properties of the composite are determined by collecting data from the density test, hardness test, and tensile test performed based on ASTM standards. The finding results showed that the physical and mechanical properties of coconut shell reinforced polymer composite are influenced significantly by the wt% of coconut shell. The maximum tensile strength was achieved at 15% wt% of the coconut shell.
Publication Details
Page(s) 2051-2057
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 17, Year: 2023

Request the full text from PASTIC

Keywords
polymer, composites, Mechanical properties, Coconut Shell, natural fibers
0

Citations

0

Downloads

39

Views