No Detail Found!

Numerical analysis on the effect of diluted hydrogen fuel by a fixed amount of supplied hydrogen using a quasi-three-dimensional solid oxide fuel cell model

Author(s)
W. C. Tan Faculty of Mechanical Engineering and Technology, Universiti Malaysia Perlis, Pauh Putra Campus, Arau, Perlis, Malaysia; Thermofluids and Energy Research Group, Universiti Malaysia Perlis, Pauh Putra Campus, Arau, Perlis, Malaysia
E. A. Lim Institute of Engineering Mathematics,Universiti Malaysia Perlis, Arau, Perlis,Malaysia
E. M. Cheng Faculty of Electronic Engineering and Technology,Universiti Malaysia Perlis, Pauh Putra Campus, Arau, Perlis,Malaysia
W. H. Tan Faculty of Mechanical Engineering and Technology,Universiti Malaysia Perlis, Pauh Putra Campus, Arau, Perlis,Malaysia
H. A. Rahman Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia,Parit Raja, Johor,Malaysia
Abstract
Solid oxide fuel cell (SOFC) has excellent fuel flexibility for various fuels. Despite some drawbacks like storage and transportation, hydrogen stands up as the best fuel for SOFC. Hydrogen fuel is diluted non-reactive gas species before it is supplied to the SOFC. In this study, a quasi-three-dimensional SOFC model with real microstructure is used to analyse the effect of the diluted fuel mixture. The hydrogen fuel is diluted with nitrogen and a small amount of steam. The mole amount of hydrogen within fuel mixtures is kept constant. On the other hand, the air that is supplied to the air channel of the SOFC remains unchanged. It is found that the cell that is supplied with the highest concentration of hydrogen has the highest performance due to its high partial pressure of hydrogen within the fuel mixture. Such a high partial pressure promotes a low anode concentration loss. Also, the cell that is supplied with a low hydrogen concentration is unable to benefit from its high average cell temperature as its performance is drained by the low partial pressure of hydrogen within the fuel mixture.
Publication Details
Page(s) 609-614
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 6, Year: 2023

Request the full text from PASTIC

Keywords
Heat Generation, Performance Analysis, Dusty gas model, area-specific resistance
0

Citations

0

Downloads

61

Views