Treatment of industrial wastewater has become a priority for countries and governments to protect the environment from pollution. This study aimed to treat cheese manufacturing wastewater (CMW) using yeast as a safe method which provides the use of clean water for public consumption as well as in irrigation of agriculture. The Cheese Manufacturing Wastewater (CMW) samples of the present study were collected from dairy products manufacturing factory located in Southern of Jeddah, Saudi Arabia. The physico-chemical parameters were measured including, pH, color, electrical conductivity (EC), turbidity and temperature, Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), total dissolved solids (TDS), total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), fats, oil and grease (FOG) and sulfates. The biological treatment assay was carried out using Saccharomyces cerevisiae ATCC 9763. The biological treatment of CMW revealed that, pH values moved towards the neutrality (6.5), turbidity removal efficiency was 92%, the overall removal percent of TSS was 97%, the removal percent of TDS was 77%, maximum removal percent of FOG was observed 93%, the most reduction in BOD was 86%,reduction in COD values was 83%, TN overall removal percent was about 85%, maximum removal percent of phosphate was 92%, and the overall removal percentage of sulfate was 57%. The biodegradation index (BI) was 0.79 and gradually decreased until reaching values of 0.24. The biological treatment process was optimized, and the most optimum pH was 6.5 when 0.3% of inoculum was used during the process.