In general terms good geometric design means providing an adequate level of mobility and appropriate land use access for the function of the roadway while maintaining high degree of safety for all roadway users. One of the most suitable techniques used to improve safety on roads is to check the consistency of geometric design. In this study, continuous real speed (operating speed) data was collected using a vehicle equipped with VBox (a GPS based device) along the selected test sections. Three test sections were selected along two-lane, two-way old alignment N-5 (Kotri-Thatta Section). The speed profiles, resulting from continuous tracking of vehicle, make it possible to measure true operating speed and detailed information of driver’s behaviour such as the speed variation and maximum and minimum speed, along the tangents on selected test sections of existing old alignment. The model was developed for prediction of operating speed on tangents. Cross validation was carried out to compare predicted values with observed values. The validation of developed models shows the compatibility with the trend of experimental data. Hence the developed model can be used to predict operating speed on tangents along two-lane two-way old alignment, in Pakistan.