Duplex stainless steels typically contain 50% austenite and 50% ferrite. The two phase mixture also leads to a marked refinement in grain size of both the austenite and ferrite. This, together with the presence of ferrite, makes materials about twice as strong as common austenitic steels. They contain only about half the nickel concentration of typical austenitic stainless steels; they are therefore, less expensive and less sensitive to the price of nickel. With their high chromium concentration, they have excellent pitting and crevice corrosion resistance, and to chloride stress corrosion. The two phase mixture also reduces the risk of inter granular attack; for the same reason they are not prone to solidification cracking during welding. The typical duplex stainless steel contain 22-23Cr, 4.5-6.5Ni, and 3-3.5Mo wt%, representing some 80% of all duplex stainless steel use. In present work a horse grade duplex stainless steel 2205 in the form of seamless pipe has been studied. Material exhibited excellent mechanical properties in as-received condition and after welding. The bend test results obtained from root and face of the welded samples gave satisfactory results. To analyze the microstructure, light optical microscope was used before and after welding.