Of the various industrial by-products, fly ash, a finely divided mineral residue generated from the combustion of pulverized coal in power plants, is the most abundant. Its utilization as mineral admixture in cement concrete transforms a costly liability into an economical proposition. Further more, the costs and environmental problems associated with its disposal are minimized or eliminated. This study comprises on RCC beams made with ordinary Portland cement and with different configurations of fly ash by replacing cement and fine aggregate. To achieve the aim of present study, total 27 RCC beams were made. Among 27 beams, 3 beams were made with normal concrete, 12 beams were made by replacing 25, 50, 75, and 100% of fine aggregate by fly ash and 12 beams were made by replacing 10, 25, 50, and 75% of cement by fly ash. The study of these beams was carried out in terms of Load-deflection, ultimate strength, crack pattern and failure mode. By analyzing the test results, it was observed that the beams made by replacing 75% of fine aggregate by fly ash with 4 and 6 stirrups has shown less deflection and higher ultimate load carrying capacity whereas the beams made by replacing 50 and 75% of cement by fly ash have given inferior behaviour in comparison to the beam made by ordinary Portland cement concrete.