No Detail Found!

Effect of Organic Additives and Current Efficiency on Electrodeposition of Nickel from Sulfate Bath

Author(s)
M. Sadiq Department of Mechanical Engineering, University of Engineering and technology Peshawar,,Pakistan
M. Humayun Department of Basic sciences, University of Engineering and Technology,Peshawar,Pakistan
A. Naveed Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
M. Arif Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
S. Afridi Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
M. N. Khan University of Engineering and Technology,Peshawar,Pakistan
M. Asif Department of Electronics, University of Peshawar,Peshawar,Pakistan
Abstract
The properties of nickel metal electrodeposited in presence of organic additives in various concentrations were studied with respect to current efficiency of the bath. Films were electrodeposited in various pH and temperatures, for different durations in order to get high current collection efficiency (CCE) and uniform deposition. Locally available salt of sulfate was preferably used as source of nickel. Sodium sulfate was used to improve the conductivity of the bath. The optimum concentration of nickel sulfate was found to be 0.5 M/50 ml and that of sodium sulfate was 0.5 M/ 10 ml. It was observed that the rate of deposition linearly increases with the increase in concentration of the sodium sulfate in the electrolytic bath. Further, it was observed that the rate of deposition and current efficiency increases with the increase in pH up to pH 6 and above this pH both the rate of deposition and current efficiency decreases due to the formation of nickel hydroxide in the electrolytic bath. Nickel chloride was primarily added to the bath not only to increase the corrosion of the anode but also to enhance the uniformity of the deposited layer. Surface structure analyses were carried out using scanning electron microscopy (SEM). Elemental analyses were performed using energy dispersive x-rays (EDX). Reasons for variation in properties and structural characteristics of metal deposit are discussed.
Publication Details
Page(s) 29-38
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 49, Issue: 2, Year: 2021

Request the full text from PASTIC

Keywords
SEM, EDX, Nickel Chloride
0

Citations

0

Downloads

48

Views