No Detail Found!

Synthesis of MnO2 Carbon Nanotubes Catalyst With Enhanced Oxygen Reduction Reaction for Polymer Electrolyte Membrane Fuel Cell

Author(s)
M. Sadiq Department of Mechanical Engineering, University of Engineering and technology Peshawar,,Pakistan
M. Arif Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
A. Ullah Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
A. Naveed Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
S. Afridi Center for Advanced studies in Energy, University of Engineering and Technology Peshawar,,Pakistan
M. Humayun Department of Basic sciences, University of Engineering and Technology,Peshawar,Pakistan
M. N. Khan Department of Electrical Engineering, Bannu Campus, University of Engineering and Technology, Peshawar, Pakistan
M. Asif Department of Electronics, University of Peshawar,Peshawar,Pakistan
Abstract
Polymer Electrolyte Membrane Fuel Cell (PEMFC), an electrochemical power generating technology, uses a precious metal Platinum (Pt) catalyst for Oxygen Reduction Reaction (ORR), which is a major hindrance in its commercialization. Using a non-precious group metal (NPGM) instead of Pt will reduces the cost of PEMFCs. Herein MnO2 carbon nanotubes (CNTs) were synthesized by impregnating the transition metal in large surface carbonaceous material CNTs by hydrothermal synthesis techniques. To enhance the catalytic reaction and increase the volumetric current density, the sample was pyrolyzed at 800 0C temperature under nitrogen atmosphere. During pyrolysis, the nitrogen was also doped in the framework of carbonaceous materials. The materials were then treated with acid, removing the unreacted metals and adding oxygen functional group to the CNT framework due to which the activity of the catalyst is amplified. The catalysts have been characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), Catalyst activity has been calculated by Rotating Disc Electrode (RDE) experiment. The resulting materials are stronger in experimental conditions in alkaline environment and have high electro catalytic activity for oxygen reduction reaction (ORR). Linear Sweep Voltammetry (LSV) depicts a current density of - 4.0 mA/cm2 and over potential of -0.3V vs. Standard Calomel Electrode (SCE) in 0.1M KOH electrolyte. Rotating Disk Electrode (RDE) was conducted at 400, 800, 1200, and 1600 rpm. The results of MnO2CNT show a desirable future aspect in fuel cell commercialization.
Publication Details
Page(s) 19-27
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 49, Issue: 2, Year: 2021

Request the full text from PASTIC

Keywords
Carbon nanotubes (CNTs), Polymer Electrolyte Membrane Fuel Cell (PEMFC), Oxygen reduction reaction.
0

Citations

0

Downloads

37

Views