This paper aims to identify the most important and sensitive input variables and to prioritize the parameters based on their influence on the model outputs of a standalone photovoltaic system. Three sensitivity methods, such as sensitivity index, sensitivity coefficient variance and correlation coefficient were applied for the determination of parameter response by one variable at a time method. A total of seven input variables namely slope, solar azimuth angle, hour angle, ground reflectance, amount of total solar radiation, ambient temperature and wind speed were examined with reference to three output parameters. It was revealed that the most important and sensitive input variable was the amount of total solar radiation and the least important variables was solar azimuth angle and the lowest sensitive variable was wind speed. The higher sensitivity variance is displayed by slope followed by hour angle. Insignificant variance is noted in the results of solar azimuth angle and wind speed for all output parameters. It is concluded that the amount of solar radiation, ambient temperature and slope of the system have significant influence over the model results among all examined variables.