No Detail Found!

Development of shear capacity equations for rectangular reinforced concrete beams.

Author(s)
Abdul-Ghaffar Civil Engineering Department, Bahudin Zikria University, Multan, Pakistan
Afzal Javed Civil Engineering Department, University of Engineering & Technology, Lahore, Pakistan
Habib-Ur-Rehman Civil Engineering Department, University of Engineering & Technology, Lahore, Pakistan
Kafeel Ahmed Civil Engineering Department, University of Engineering & Technology, Lahore, Pakistan
M. Ilyas Civil Engineering Department, University of Engineering & Technology, Lahore, Pakistan
Abstract
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of these equations, extensive experiment al study was carried out on rectangular reinforced concrete beams without web reinforcement. Three parameters i.e. compressive strength, percentage of tension steel and shear span to depth ratio were considered and equations were developed for the shear strength prediction. Results of the study show that the concrete shear capacity ranges from 1.7 √ fc to 1.8 √ fc before any cracking is observed. After cracking, concrete shear capacity is almost exhausted and most of the applied shear is taken by steel till failure. Its also revealed that ACI equation is most conservative for all values of a/d, fc and p.
Publication Details
Page(s) 1-8
DOI DOI not available
Published Journal: Pakistan Journal of Engineering and Applied Sciences, Volume: 6, Issue: , Year: 2010

Request the full text from PASTIC

0

Citations

0

Downloads

89

Views