No Detail Found!

Development of microstructure in silicon-aluminum-bronze.

Author(s)
J. Iqbal Department of Metallurgical & Materials Engineering, University of Engineering and Technology, Lahore, Pakistan
F. Ahmad Department of Metallurgical & Materials Engineering, University of Engineering and Technology, Lahore, Pakistan
F. Hasan Department of Metallurgical & Materials Engineering, University of Engineering and Technology, Lahore, Pakistan
Abstract
The aim of present study was to determine the sequence of micro-structural development during continuous cooling from temperatures approaching he solidus, in an as cast silicon-aluminum bronze alloy having composition Cu-6% Al-2% Si-0.6% Fe. This alloy has good resistance to sea-water corrosion and low magnetic permeability. This alloy is used in marine and chemical applications where corrosion resistance is a prime requirement. A study of the development of microstructure during continuous cooling from the solidus temperature showed that at high temperatures the alloy consisted of β and α phases in which the α-phase had a Widmanstatten morphology. As the temperature is lowered Fe5Si3 particles formed throughout the microstructure and this is followed by the formation of Fe3Si2 precipitates in the α-grains. On further cooling the β phase is transformed into γ2.
Publication Details
Page(s) 47-53
DOI DOI not available
Published Journal: Pakistan Journal of Engineering and Applied Sciences, Volume: 3, Issue: , Year: 2008

Request the full text from PASTIC

0

Citations

0

Downloads

63

Views