Hybrid Aluminum metal matrix composite (AMMCs) is an area of research now a days because of its use in automotive, aerospace and high-performance applications. These AMMCs have properties i.e. good strength, light weight, increased wear resistance, hardness and better mechanical properties. In this study a hybrid composite of matrix aluminum 2218 alloy and particle reinforcement of SiC, Al2O3 and metal (grey cast iron) was prepared by using stir casting process. Annealing was done in order to homogenize the composite matrix and remove stresses arise from casting in a metal mold. Mechanical testing and optical microscopy were carried out. Energy dispersive x-ray spectroscopy (EDX) was made to provide the elemental analysis or composition of composite at the selected regions. Mechanical testing results have revealed that the tensile strength, hardness and toughness energy of the composite was increased than the monolithic material and changing the percentage of reinforcement have significant effect on it. Micro structural analysis showed that the particulate reinforcements were distributed uniformly throughout the composite.