No Detail Found!

Lubrication Analysis of Piston Secondary Motion using Gauss Seidel Iterative Technique.

Author(s)
R. Kalvin Mechanical Engineering Department, Wah Engineering College, University of Wah, Pakistan
A. Nadeem Inha University, South KoreaPistons, Rings, South Korea
A. Tariq Mechanical Engineering Department, Wah Engineering College, University of Wah, Pakistan
B. Nadeem Mechanical Engineering Department, University of Engineering and Technology Taxila, Pakistan
Abstract
This research deals with the analysis of lubrication exaggerated by the secondary motion of the piston. The quality of lubrication is affected by oil consumption, fuel efficiency and emission of exhaust gases. Therefore this technique is used to make a mathematical model of piston. It is further analyzed on MATLAB using Gauss Seidel iterative method to get the required results and see the effects on lubrication layer caused by piston tilt motion. The technique used in this research is by discretizing the equations and making matrices of the required forces for different crank angles. Also mesh is being generated at piston skirt. Across each node of mesh the effect of lubrication layer was observed. The results extracted from the research showed that the lubrication regimes changes and affect piston secondary motion and hydrodynamic film thickness is maximum at the top of the skirt but as piston moves from top dead center to bottom dead center, it decreases on the lower edge of the skirt and hydrodynamic pressure also acts on the skirt on thrust side of the cylinder.
Publication Details
Page(s) 53-61
DOI DOI not available
Published Journal: Technical Journal, Volume: 23, Issue: 3, Year: 2018

Request the full text from PASTIC

Keywords
Crank Angles
0

Citations

0

Downloads

68

Views