No Detail Found!

Comparative Analysis of Heat Transfer through Corrugated and Straight Channels.

Author(s)
N. Abbas Department of Mechanical Engineering, University of Central Punjab, Lahore, Pakistan
S. Nazir Space and Upper Atmosphere Research Commission (SUPARCO), Karachi, Pakistan
M. Hammi Faculty of Science, University of Mohammed V, BP 1014 Rabat, Morocco
Abstract
This research aimed at conducting thermal analysis to carry out heat transfer comparison between two different heat channels. For this purpose, two 2-D (corrugated and straight) channels have been considered for investigation. Direct numerical simulation has been implemented, in which Reynolds numbe risvaried in an ascendin gma n n e r (20005000), while flow behavior has been maintained in a steady turbulent mode. To undergo analysis, Fluent (ANSYS Workbench 15.0) has been utilized. Air has been considered as a working fluid during analysis, while dimensions like cross section, height and length have been taken as invariant parameters for both channels. For all cases wall flux, has been regarded as a constant measure during heat transfer simulation. After obtaining solution, results have been compared for both channels and it is concluded that transmission of heat is much more prominent in corrugated channel as in comparison with straight channel. In studied geometry, 40% improvement of heat transmission (by average) were obtained in corrugated channel as compared to the straight channelsuccessfully. Moreover, Augmentation of the Reynolds number leads to an increase in velocity due to the sharp corner edges of cavity.
Publication Details
Page(s) 35-42
DOI DOI not available
Published Journal: Technical Journal, Volume: 23, Issue: 3, Year: 2018

Request the full text from PASTIC

Keywords
heat transfer, Nusselt Number, Straight Channel, Corrugated Channel
0

Citations

0

Downloads

50

Views