No Detail Found!

Experimental Evaluation of Corrosion for Aluminum Alloy in Aerated Nacl Solutions under Turbulent Hydrodynamic Conditions.

Author(s)
Ghulamullah Kakar Department of Chemical Engineering, Balochistan University of Information Technology, Engineering & Management Sciences (BUITEMS), Quetta, Pakistan
Faisal Mushtaq Department of Chemical Engineering, Balochistan University of Information Technology, Engineering & Management Sciences (BUITEMS), Quetta, Pakistan
Saeedullah Jan Mandokhail Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Mohammad Siddique Department of Chemical Engineering, Balochistan University of Information Technology, Engineering & Management Sciences (BUITEMS), Quetta, Pakistan
Ali Nawaz Mengal Department of Petroleum and Gas Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Abstract
The application of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurement were employed for the evolution of corrosion of aluminum alloy (6262) in artificial sea water under the turbulent flow conditions. The flow condition experiments were simulated using rotating cylinder electrode (RCE). The obtained results showed that enhancing the incremental fluid flow velocity, a significant change were occurred in corrosion reaction mechanism and improvement of the corrosion kinetic of the system were also been observed. By increasing the fluid flow velocity, there is an increase in the limiting current. This result conclude the presence of a mixed control on the corrosion process associated with the formation as well as stabilization of obtained corrosion product layers on the investigated electrode surface.
Publication Details
Page(s) 172-177
DOI DOI not available
Published Journal: Journal of Applied and Emerging Sciences , Volume: 7, Issue: 2, Year: 2017

Request the full text from PASTIC

References
Zhang F, Zhao L, Chen H, Xu S, Evans DG, Duan X. (2008). Corrosion Resistance of Superhydrophobic Layered Double Hydroxide Films on Aluminum. Angew. Chem. Int. 47:2466 –2469
Ashassi-Sorkhabia H, Shabanib B, Aligholipoura B, Seifzadehab D. (2006). The effect of some Schiff bases on the corrosion of aluminum in hydrochloric acid solution. Applied Surface Science 252(12):4039-4047
Klapper HS, Laverde DVasquez C. (2008). Evaluation of the corrosion of UNS G10200 steel in aerated brines under hydrodynamic conditions. Corrosion Science 50(9):2718-2723.
Schmitt G, Bakalli M. (2006). A critical review of measuring techniques for corrosion rates under flow conditions. NACE International, San Diego, California, PP 27.
Silverman DC. (2004). The rotating cylinder electrode for examining velocity-sensitive corrosion- a review. Corrosion 60(11):1003-1023
Gabe DR. (1974). The rotating cylinder electrode. Journal of Applied Electrochemistry 4: 91-108.
Cottis R, Turgoose S. (1999). Electrochemical Impedance and Noise. Corrosion Testing Made Easy, (Syrett, B.C, Series Editor), NACE International, Houston, TX, 1999
Juettner K, Lorenz W, Kendig M, Mansfeld F. (1988). Electrochemical Impedance Spectroscopy on 3D Inhomogeneous Surfaces Corrosion in Neutral Aerated Solutions. Journal of the Electrochemical Society 135(2): 332-339.
0

Citations

0

Downloads

106

Views