No Detail Found!

Effect of Lime and Cement on Unconfined Compressive and Shear Strength of Soil in Baleli and its Vicinity.

Author(s)
Ahmed Bilal Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Anwaar Hazoor Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Syed Nasir Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Syed Zafar Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Muhammad Ayoub Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Ehsanullah Kakar Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management, Sciences, Quetta, Pakistan
Salahudin Department of Civil Engineering, Balochistan University of Engineering and Technology, Khuzdar, Pakistan
Abstract
This study was carried out with an intention to observe any sign of improvement of clayey silty soil due to addition of lime and cement. This paper focuses on the primary research of using blends of lime and cement on the soil of Baleli and its vicinity region to evaluate the features of cement and lime at the shear strength of unsaturated soil through carrying out direct shear and unconfined compression tests on soil samples. Soil admixed along with natural or artificial admixtures is one of the techniques to improve its physical characteristics, consequently we need to alter some features of soil that could make it expedient to calculate the bearing ability of the soil and even stabilize the weight bearing potential. The values obtained here are in comparison with unblended soil samples, at 5% admixed soil with cement and lime showed maximum angle of friction and moderate cohesion but shear strength 30.32 psi achieved at this percentage of lime and cement was greater than other percentages. The unconfined strength of this blended soil presented a compression of 86.32 N/mm2 at 0.0503 mm/mm percent strain which is lower than maximum percentages of lime and cement and conclusions are drawn toward the usability of lime and cement as a value effective approach. Soil sample admixed with 7% lime and cement presented less cohesion than those blended with 3% and 5% lime and cement but greater shear strength as compared to all of the samples including simple soil. The unconfined strength of this blended soil presented a compression of 115.32 N/mm2 at 0.0755 mm/mm percent strain which is lower than maximum percentages of lime and cement. As a significance, its miles better to combine distinctive types of soils collectively to improve the soil vitality back ground.
Publication Details
Page(s) 166-171
DOI DOI not available
Published Journal: Journal of Applied and Emerging Sciences , Volume: 7, Issue: 2, Year: 2017

Request the full text from PASTIC

References
Ÿ BinalaA,BasaB,KaramutaOR, 2016.Improvement of the Strength of Ankara Clay with SelfCementing High Alkaline Fly Ash,Procedia Engineering 161 374 -379
Ÿ CanakciH,AzizA,CelikF., 2015.Soil stabilization of clay with lignin, rice husk powder and ash,Geomechanics and Engineering 8 67 -79
Ÿ CuisinierO,Le BorgneT,DeneeleD,MasrouriF., 2011.Quantification of the effects of nitrates, phosphates and chlorides on soil stabilizationwith lime and cement,Engineering Geology Elsevier 117 229 -235
Le-RunigoB,FerberV,CuiYJ,CuisinierO,DeneeleD., 2011.Performance of lime-treated silty soil under long-term hydraulic conditions,Engineering Geology 118 20 -28
Ÿ RamajiAE., 2012.Review on the Soil Stabilization Using Low-Cost Methods,Journal of Applied Sciences Research 8 2193 -2196
ASTM. (2010). Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil ASTM D4643
ASTM. (2017). Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis ASTM D 6913
ASTM. (2017). Standard Test Methods forLiquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D 4318
ASTM. (2012). Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3) ASTM D698
ASTM. (2017). Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils ASTM D 6528.
ASTM. (2016). Standard Test Method for Unconfined Compressive Strength of Cohesive Soil ASTM D 2166.
0

Citations

0

Downloads

43

Views