No Detail Found!

Mechanical Characterization of Palmfruit (Hybrid) Fibre Reinforced Composite.

Author(s)
R Thamilarasan Department of Mechanical Engineering, St. Peter's University, Avadi, Chennai-54,
K Purushothaman Department of Mechanical Engineering, St. Peter's Engg college, Avadi, Chennai-54, India
Abstract
This paper describes the research work carried out with natural composites of Jute-Palm fruit-jute (J-P-J) and Sisal-Sisal-Sisal (S-S-S) fibers at different orientation are prepared with polymer resin. Natural fibers are collected from local farmers and extracted to our required size also cleaned, treated as per our requirement. Specimens were prepared with ASTM Standards and are tested to evaluate tensile strength, Flexural strength and Impact strength. Woven mat technique and Hand lay-up technique is followed at room temperature to mould the specimen. The weight fractions of fibers are equal 50:50% for all the fibers used in the experimental analysis. Flexural, tensile and Impact properties of hybrid composites were analyzed. The result shows the energy absorbed by the jute-palm-jute composite is more than the other for equal weight fractions.
Publication Details
Page(s) 92-94
DOI DOI not available
Published Journal: Pakistan Journal of Biotechnology, Volume: 15, Issue: S2, Year: 2018

Request the full text from PASTIC

References
AshokKumar,Lingadurai , K.,Raja , K.,P.Ganeshan, 2016.Prediction Effect of Fiber Content on Mechanical Properties of Banana and Madar Fiber Hybrid Polyester Composites,Advances in Natural and Applied Sciences 10 180 -183
Ganeshan , P.,Raja , K.,Lingadurai , K.,M.Kaliappan, 2015.Design and Development of Alternate Composite Material For An Automobile Drive Shaft,International Journal of Applied Engineering Research 10 12051 -12057
Ganeshan , P.,K.Raja, 2016.Improvement on the Mechanical Properties of Madar Fiber Reinforced Polyester Composites,Int. J. Adv. Engg. Tech 7 261 -264
Gupta , M.K.,Srivastava , R,H.Bisaria, 2015.Potential of Jute Fibre Reinforced Polymer Composites: A Re- view,International Journal of Fiber and Textile Research 5 30 -38
Hafsatsaliu , R. and U.S.,Ishiaku , Yakubu., 2015.The effect of epoxy concentration and fiber loading on the mechanical properties of ABS/ Epoxy coated kenaf fiber composites,Open journal of composite Materials 5 41 -48
Kandeepan , C.,Raja , K.,P.Ganeshan, 2016.Investigation on The Mechanical Properties of Madar Fiber Reinforced In Polymer Matrix Composites, 110 116 -
Thamilarasan , R. and K.,Purushothaman,Newdelhi, 2016.on recent innovations in Engineering and technology (ICRIEAT)-Edupedia publications pvt ltd-, -
Velmurugan , R.,V.Manikandan, 2005.Mechanical properties of Glass/Palmyara fiber waste sand -wich composites,Indian Journal of Engineering and Material Sciences 12 563 -570
Vinoth , D.,Raja , K.,Ashok Kumar , B. and P.,Ganeshan, 2016.Tensile Properties of Madar Fiber Reinforced Polyester Composites,Advances in Natural and Applied Sciences 10 257 -261
Warenyou, 2005.Sridash and Songklanakarin, Pulping and Paper properties of palmyara palm fruit fibers,J. Sci. Technol 32 201 -205
Yoganandam , K.,Raja , K.,Ganeshan , P.,V.Mohanavel, 2016.,International Journal of Printing, Packaging and Allied Sciences 4 3669 -3673
0

Citations

0

Downloads

39

Views