No Detail Found!

Investigation on Microstructure and Micro Hardness of Friction Stir Welded Dissimilar Aluminum Alloy Plates.

Author(s)
G Swaminathan Bharath Institute of science and Technology, Bharath University, Chennai-73
S Sathiyamurthy Department of Automobile Engineering, Eswari Engineering College, Chennai-89,
P Naveenchandran Department of Automobile Engineering, Bharath University, Chennai-73, India
Abstract
Assembly of two different grades of aluminum plates is need in many light weight vehicles structures like military, aerospace, ship building and automobile applications. This paper deals with joining of AA7075-T651 with AA6063-T6 aluminum alloys by friction stir welding (FSW) process using cylindrical straight and taper at Tool revolving speed, tool axial force and welding transverse speed of 1000,1100,1200rpm, 4, 5, 6 KN and 30,45,60 mm/min. The effect welding process parameters on weld appearance and hardness were examined experimentally. The microstructures were observed at various regions and analyzed by means of optical microscope. From this investigation were established that the use of taper cylindrical pin profile of tool provides to better flow of materials between both alloys and the formation of flaw free weld zone. The growth in Micro-Hardness is attributed to the development of fine grains and intermetallic in the weld zone, and in addition, the reduced size of weaker regions, such as TMAZ and HAZ regions, results in good metallurgical properties.
Publication Details
Page(s) 79-84
DOI DOI not available
Published Journal: Pakistan Journal of Biotechnology, Volume: 15, Issue: S2, Year: 2018

Request the full text from PASTIC

References
Gangwar , V., S.,Vivek , S.,Ahamad and S,Ali, 2016.,Optimization of Parameters of Friction Stir Welding OG AA-6061. International Journal of Advance Research and Innovation 4 737 -741
HakanAydin, 2012.Effect of Welding Parameters on Tensile Properties and Fatigue Behavior of Friction Stir Welded 2014-T6 Aluminum Alloy,Trans Indian Inst. Met 65 21 -30
Madhavi , B.,J.Jeevan,M., 2014.Karthik Teja, Heat and Material Flow Effects on Microstructures and Hardness in Friction-Stir Welded Joints,Procedia Engineering 86 209 -214
Md. Reza-E-Rabbya , Anthony P.,Reynoldsa, 2014.Effect of tool pin thread forms on friction stir weldability of different aluminum alloys,Procedia Engineering 90 637 -642
Mohan , D.,:, 2014.Friction Stir Welding Tools and Overview,International Journal of IT, Engineering and Applied Sciences Research (IJIEASR) 3 -
PasqualeCavaliere, 2013.Friction stir welding of Al alloys: analysis of processing parameters affecting mechanical behavior,Procedia CIRP 11 139 -144
RaguNathan,S.,V.Balasubramanian,S.Malarvizhi,A.G.Rao, 2015.Effect of welding processes on mechanical and microstructural Q4 characteristics of high strength low alloy naval grade steel joints,Defence Technology 11 1 -10
RajKumar . V., M. VenkateshKannan. P.,Sadeesh , N.,Arivazhagan and K.,DevendranathRamkumar, 2014.Studies on effect of tool design and welding parameters on the friction stir welding of dissimilar aluminium alloys AA 5052 - AA 6061,Procedia Engineering 75 93 -97
Ravikumar , S.,V.S.Rao,R.V.Pranesh, 2014.Effect of welding Parameters on Macro and Microstructure of Friction stir welded dissimilar Butt joint between AA7075-T651 and AA60- 61-T651,Procedia Materials Science 5 1726 -1735
Sivaraj , P.,D.Kanagarajan,V.Balasubramanian, 2014.Effect of post weld heat treatment on tensile properties and micro-structure characteristics of friction stir welded armour grade AA7075-T651 aluminium alloy,Defence Technology 10 1 -8
VijayaKumar,P.,G. MadhusudhanReddy,K.Srinivasa Rao, 2015.Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone,Defense Technology 11 166 -173
VinayakMalika,Sanjeev N Kb , H. Suresh,Hebbarb, 2014.Kailasa, Investigations on the Effect of Various Tool Pin Profiles in Friction Stir Welding Using Finite Element Simulations,Procedia Engineering 97 1060 -1068
0

Citations

0

Downloads

39

Views