No Detail Found!

Numerical Analysis of Groundwater-Flow and Solute­ Transport under Skimming Well

Author(s)
Ata ur Rehman Tariq Centre of Excellence in Water Resources Engineering, University of Engineering and Technology, Lahore, Pakistan
Shakil Ahmad National University of Science and Technology, Islamabad, Pakistan
Zakir Hussain Dahri Pakistan Agricultural Research Council (PARC), Islamabad, Pakistan
Bashir Ahmad Pakistan Agricultural Research Council (PARC), Islamabad, Pakistan
Ghulam Ali Pakistan Agricultural Research Council (PARC), Islamabad, Pakistan
Abstract
The study employed three-dimensional finite-difference groundwater flow (MODFLOW) and transport model (MT3D) to model the behavior of groundwater flow and solute transport beneath a skimming well. Data regarding aquifer characterization, watertable elevations and pumped-water quality for a double-strainer well located at Haroon farm, Khairpur, was used to calibrate and verify the flow and transport models. A number of pumping-scenarios were formulated to evaluate the performance of skimming well. The results indicated that, for a shallow layer of fresh water, the pumped-water salinity increases linearly with pumping time. The rise in salinity is more pronounced for a higher well-discharge and greater well operational factor. Although the drawdown in the well achieved steady-state condition within 0.75 day, but the quality of pumped-water continued to deteriorate. The rise of saline-water mound also kept rising with pumping time. The study revealed that, in the aquifers where salinity-difference of fresh and saline water is small, upconing not only occurs at a rapid rate but also to a greater height. Furthermore, it was observed that, in case when the saline-water cone had already intruded the fresh aquifer, any reduction in well-discharge could neither ensure salt-free water-supply nor any fall in the already raised saline-water mound could be observed; instead they kept rising on but at a sluggish rate. Unlike the common belief and field observations, intermittent pumping could neither control the upward movement of interface, nor was any improvement in quality of pumped water observed; instead they remained more or less stagnant, nevertheless the technique is helpful to avoid aquifer deterioration. Such contrast in the results of this study is mainly attributed to the fact that MODFLOW/MT3D models do not take into account the density of fresh and saline water, which is an important parameter in suppressing the upconing. Therefore, it was believed that the models tend to over-estimate the solute movement and quality of pumped water. Modification is suggested to be incorporated in MODFLOW/MT3D programs.
Publication Details
Page(s) 12-28
DOI DOI not available
Published Journal: Science, Technology and Development, Volume: 30, Issue: 1, Year: 2011

Request the full text from PASTIC

0

Citations

0

Downloads

51

Views