No Detail Found!

Experimental Study on Deformation and Densification Properties of Sintered Atomet 4601+TIC Alloy Steels under Cold Upsetting.

Author(s)
M Venkat Krishna School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, SASTRA University, Thanjavur -613401, Tamil Nadu, India
T.K Kandavel School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, SASTRA University, Thanjavur -613401, Tamil Nadu, India
K Palaksha Reddy School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, SASTRA University, Thanjavur -613401, Tamil Nadu, India
A Jayaprakash School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, SASTRA University, Thanjavur -613401, Tamil Nadu, India
Abstract
The present investigation is focussed on to develop and study the densification and deformation of cold forged prealloyed ATOMET 4601 and admixed with 2% TiC high strength alloy steels. Elemental TiC powder was homogeneously mixed with ATOMET prealloyed powder through Powder Metallurgy (P/M) route. The physical properties of P/M alloy steel powders were measured as per the ASTM Standards. The cylindrical sintered preforms of size Ø25x12 mm were used for the present work. In order to study the plastic deformation and densification characteristics of the alloy steels preforms, the specimens were subjected to cold upset with an incremental load. The axial load was increased upto the appearance of fine cracks on the lateral surface of the deformed alloy steel preforms. Physical measurements have been taken on deformed and undeformed specimens to calculate stress and strain values. The density of specimens was evaluated by the Archimedes' principle for the as sintered and the specimen after each deformation. The influencing parameters such as true axial stress, true height strain, true lateral strain, density and hardness were correlated each other for the deformation and densification studies of the alloy steels. Microstructures of alloy steels taken by optical microscope were also corroborated with deformation properties. It is found from the plots that addition of TiC to prealloyed powder deteriorates the plastic deformation and densification properties of ATOMET 4601 alloy steel. The titanium carbides embedded between the ferrite gains drastically affect the plastic flow of TiC added alloy steel.
Publication Details
Page(s) 183-187
DOI DOI not available
Published Journal: Pakistan Journal of Biotechnology, Volume: 14, Issue: 2, Year: 2017

Request the full text from PASTIC

References
.B212-13, Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel, -
.B213-13, Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel, -
.B527-15, Standard Test Method for Tap Density of Metal Powders and Compounds, -
Chandramouli , R., T.K.,Kandavel , D.,Shanmugasundaram and T.,AshokKumar, 2007.Deformation, densification, and corrosion studies of sintered powder metallurgy plain carbon steel perform,Materials and Design 28 2260 -2264
Channankaiah and G.,Ranganath, 2012.Experimental approach on densification and mechanical Properties of sintered powder metallurgy AISI 4140 Steel performs,ARPN Journal of Engineering and Applied Sciences 7 298 -303
German R.M., 1998.,Powder Metallurgy of Iron and Steel 276 -279
KandavelT.K.,R.Chandramouli,M.Ravichandran, 2010.Experimental study on the plastic deformation and densification characteristics of some sintered and heat treated low alloy powder metallurgy steels,Mater Des 31 485 -92
Kuhn H.A . and C.L.,Downey, 1971.Deformation characteristics and plasticity theory of sintered materials,International Journal of Powder Metallurgy 2 15 -25
Lee S.R. , Y.K.,Lee , C.H.,Park and D.Y.,Yang, 2002.A new method of preform design in hot forging by using electric field theory,International Journal of Mechanical Science 44 773 -792
.,Experimental study on deformation ….. 187 -
Mamalis A.G.,G.L.Petrossian,D.E.Manolakos,, 1999.The effect of porosity and microdefects on plastically deformed porous materials,J. Mater. Process Technol 96 117 -23
PandeyK.S.,, 1991.Some investigations on the cold deformation behavior of sintered Aluminum - 4% copper alloy powder preforms,Quarterly International Journal of Powder Metallurgy Science Technology 2 45 -54
Shanmugasundaram D.,R.Chandramouli,T.K.Kandavel, 2009.Cold and hot deformation and densification studies on sintered Fe-C-Cr-Ni low alloy P/M steels,Int Journal Advanced Manufacturing Technology 41 8 -15
VamsikrishnaB.,P.Venugopal and P.K. Prasad, 2004.Analysis of deformation during simultaneous plastic deformation of dissimilar powder metallurgical preforms,Powder Technol 146 137 -46
0

Citations

0

Downloads

88

Views