No Detail Found!

Experimental investigation of heat transfer coefficient in vertical tube rising film evaporator

Author(s)
Syed NAVEED UL HASAN Department of Chemical Engineering, University of Engineering & Technology (UET), Peshawar, PAKISTAN
Sultan ALI Department of Chemical Engineering, University of Engineering & Technology (UET), Peshawar, PAKISTAN
Abstract
This paper reports the experimental evaluation of the heat transfer coefficient (U) in a VRF (Vertical Tube Rising Film Evaporator). The aim is to describe the variation of U against different process parameters. Experiments were carried out for laminar flow conditions. The experimental unit is a floor standing tubular framework for a rising film evaporation system. There are many parameters affecting heat transfer coefficient in evaporators, but it was not possible to consider all of them, so parameters including, Reynolds Number (NRe), Temperature Difference (ΔT), Feed Temperature (Tf) and Re­circulation Ratio (R) were investigated while other factors were kept constant. The experimental results obtained showed that heat transfer coefficient increased with the increase in Reynolds number, feed temperature and temperature difference. The increase in re-circulation ratio also increased the heat transfer coefficient but up to the value of 0.85 and after this the heat transfer coefficient started decreasing slowly and then remained almost constant. An experimental correlation has been developed to relate the Nusselt number and the parameters investigated during the research work.
Publication Details
Page(s) 539-548
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 30, Issue: 4, Year: 2011

Request the full text from PASTIC

0

Citations

0

Downloads

124

Views