No Detail Found!

Coagulation-adsorption hybrid process for the treatment of dyes and pigments wastewater.

Author(s)
Abdul Karim Shah Department of Chemical Engineering, Dawood University of Engineering & Technology, Karachi, Pakistan
Syed Farman Ali Shah Department of Chemical Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Hafeez-Ur Rahman Memon Institute of Petroleum & Natural Gas Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abstract
The study aimed to improve the effectiveness of dyes and pigments wastewater treatment. Hybrid system of adsorption and coagulation was applied for the reduction of COD, color, turbidity and TSS. Activated carbon adsorbent was prepared from a waste of sugar industry boiler. It was processed through physicochemical treatment with sulfuric acid following grinding, sieving, washing and drying unit operations. Combined wastewater of dyes and pigments manufacturing plant was treated with a hybrid process of coagulation and adsorption. FeCl3, FeSO4 and Alum coagulants were tested individually and found them less effective. It was revealed that FeCl3 coagulation, adsorption and hybrid process reduced COD (41, 51and 54%), Color (67, 70 and 89%), turbidity (69, 71 and 90%) and TSS (82, 93 and 97%) respectively. Combination of FeCl3-SBFA (Sugarcane Bagasse Fly Ash) proved 90% efficient in removal than coagulation as an individual process. 4g adsorbent dose was optimized for this hybrid process.
Publication Details
Page(s) 595-602
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 32, Issue: 4, Year: 2013

Request the full text from PASTIC

0

Citations

0

Downloads

107

Views