No Detail Found!

Performance of pavements under extreme loading and temperature conditions using polymer modified bitumen.

Author(s)
Kamran Muzaffar Khan University of Engineering and Technology (UET), Taxila, Pakistan
Ali Asghar Taxila Institute of Transportation Engineering, University of Engineering and Technology (UET), Taxila Pakistan
Abstract
Roads and pavements in Pakistan are prone to varying temperature and extreme loading conditions throughout year which results in disintegration, rutting, development of stresses in road. Accumulated strain, Resilient strain, Creep stiffness and Modulus of resilience of asphalt concrete mixes have been studied by changing temperatures at 500KPa loading to understand the pavement behaviour under high temperature. Tests were performed using Universal Testing Machine (UTM 5P) on the mixes prepared in the laboratory. Polymer Modified Bitumen (Pmb) is used in 50% mixes to compare the behaviour of in situ Asphalt Concrete mixes with and without Pmb under same temperature & loading conditions. Binder 60-70 was used in all mixes. Percentage of Pmb used was 3.0%, 3.5%, 4.0%and 4.5% for mixes. The results of laboratory tests on asphalt mixes under the influence of load, environmental and mix variables are studied and presented in this search. Main properties have been tabulated and analysis has been made, which shows certain important results. Tests have been performed at 40°C and 55°C for 60-70 binder and Pmb separately. UTM-5P was used to study the accumulated strain, resilient strain, creep stiffness and modulus of resilience of each sample. Results obtained from the tests depicts that Pmb shows better performance as compared to the ordinary mixes.
Publication Details
Page(s) 52-59
DOI DOI not available
Published Journal: Technical Journal, Volume: 18, Issue: 1, Year: 2013

Request the full text from PASTIC

0

Citations

0

Downloads

64

Views