No Detail Found!

Evaluation of Silica-concrete through destructive and non-destructive testing.

Author(s)
Anwar Khitab Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur, Pakistan
Muhammad Tausif Arshad Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur, Pakistan
Faisal Mushtaq Awan Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur, Pakistan
Imran Khan Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur, Pakistan
Imtiaz Ahmed Department of Civil Engineering, Mirpur University of Science and Technology, Mirpur, Pakistan
Abstract
This article reports the effects of silica fume quantity in concrete through destructive and non-destructive testing. Destructive testing was performed through standard compressive strength and split cylinder tensile strength tests, whereas the non-destructive testing was performed by means of ultrasonic pulse velocity (UPV) apparatus. Additionally, density and slump values of fresh concrete were also evaluated. Four types of concrete were prepared with 0%, 5%, 7.5% and 10% silica fume addition as mass percentage of cement. At 28 days of age, the ultrasonic pulse velocities through each concrete specimen were experimentally determined. It is observed that ultrasonic pulse velocity increases with increase in the mass of silica fume indicating the increase of strength with silica fume. The same results were observed with destructive testing. At the end, the UPV results were compared with compressive and split cylinder tensile strength and linear relationships were obtained in each case.
Publication Details
Page(s) 917-920
DOI DOI not available
Published Journal: Science International, Volume: 25, Issue: 4, Year: 2013

Request the full text from PASTIC

0

Citations

0

Downloads

88

Views