No Detail Found!

Influence of Chemical Surface Modifications on Mechanical Properties of Combretum Dolichopetalum Fibre - High Density Polyethylene (HDPE) Composites.

Author(s)
Azeez Taofik Oladimeji Biomedical Technology Department, Federal University of Technology, P. M. B. 1526, Owerri, Imo State, Nigeria
Onukwuli Okechukwu Dominic Chemical Engineering Department, Nnamdi Azikiwe University, P. M. B. 5025, Awka, Anambra State, Nigeria
Walter Peter Echeng Chemical Engineering Department, Nnamdi Azikiwe University, P. M. B. 5025, Awka, Anambra State, Nigeria
Menkiti Mathew Chukwudi Chemical Engineering Department, Nnamdi Azikiwe University, P. M. B. 5025, Awka, Anambra State, Nigeria
Abstract
Maximizing the use of natural fibres as ecofriendly materials in polymer composite applications reduces its threat posed to human through increased biomass in the environment. In this study, the effect of chemical surface modifications using acetic anhydride and sodium hydroxide solution on the mechanical properties of Combretum dolichopetalum fibre-HDPE composites was aimed to be investigated. Fibres were treated with 6 % acetic anhydride and 12 % NaOH solutions for 30 minutes at room temperature based on optimum treatment conditions after water retting extraction process, then, the composites were prepared. The mechanical properties (tensile strength, tensile modulus, flexural strength, flexural modulus, hardness and impact strength) of the C. dolichopetalum fibre reinforced HDPE matrix composites and scanning electron microscope analysis were studied. C. dolichopetalum fibre was not only effective as reinforcement of HDPE matrix but mercerization and acetylation of C. dolichopetalum fibre ultimately enhanced the mechanical properties of HDPE composites. Scanning electron microscope analysis revealed that HDPE matrix possess better adhesive interaction with acetylated and mercerized C. dolichopetalum fibre compared with untreated C. dolichopetalum fibre at ultimate tensile strength.
Publication Details
Page(s) 28-34
DOI DOI not available
Published Journal: Pakistan Journal of Scientific and Industrial Research (Series A: Physical Sciences), Volume: 61, Issue: 1, Year: 2018

Request the full text from PASTIC

References
Aldousiri , B.,Alajmi , M.,Shalwan , A., 2013.Mechanical properties of palm fiber reinforced recycled HDPE,Advances in Material Science and Engineering Journal 10 1 -7
Arsene , M.A.,Bilba , K.,Soboyeyo , A.B.O.,Soboyejo , W.O.,NOCMAT, 2005.Influence of chemical and thermal treatments on tensile strength of fibers from sugar cane bagasse and banana tree trunk. Inter-American Conference on Non-Conventional Materials and Technologies in Ecological and Sustainable Construction (IAC-, -
Arfin , J.,Rahman , M.M.,Md . Humayan, K.,Farid , A.,Md . Adbul, H.,Md . Abdul, G., 2012.Comparative study of physical and glass fiber reinforced LDPE Composites,International Journal of Science and Technology Research 1 68 -72
Ashik , K.P.,Sharma , R.S., 2015.A review on mechanical properties of natural fibre reinforced hybrid polymer composites,Journal of Minerals and Materials Characterization and Engineering 3 420 -426
Azeez , T.O.,Onukwuli , D.O., 2017.Effect of chemically modified Cissus populnea fibres on mechanical, microstructural and physical properties of Cissus populnea/high density polyethylene composites,Engineering Journal 21 25 -42
Beckermann , G.W.,Pickering , K.L., 2008.Engineering and evaluation of hemp fibre reinforced polypropylene composites: Fibre treatment and matrix modification,Composites Part A: Applied Science and Manufacturing 39 979 -988
Chandramohan , D.,Marimuthu , K., 2011.Tensile and hardness tests on natural fiber reinforced polymer composite materials,International Journal of Advanced Engineering Science and Technologies 6 97 -104
Fávaro , S.L.,Ganzerli,de Carvalho Neto , A.G.V.,da Silva , O.R.R.F.,Radovanovic , E., 2010.Chemical, morphological and mechanical analysis of sisal fibre-reinforced recycled high-density polyethylene composites,Express Polymer Letters 4 465 -473
Hussain , S.A.,Pandurangadu , V.,Palanikuamr , K., 2011.Mechanical properties of green coconut fibre reinforced HDPE polymer composite,International Journal of Engineering Science and Technology 3 7942 -7952
Hossain , S.I.,Hassan , M.,Md . Hassan, N.,Hassan , A., 2014.Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber,Advances in Material Science and Engineering 10 1 -6
Hashim , M.Y.,Roslan , M.N.,Amin , A.M.,Zaidi , A.M.A.,Ariffin , S., 2012.Mercerization treatment parameter effect on natural fibre reinforced polymer matrix composite: A brief review,World Academy of Science, Engineering and Technology 68 1638 -1644
Ishidi , E.Y.,Kolawale , E.G.,Sunmonu , K.O.,Yakubu , M.K.,Adamu , I.K.,Obele , C.M., 2011.Study of physiomechanical properties of high density polyethylene (HDPE) - palm kernel nut shell (Elaeis Guineasis) composites,Journal of Emerging Trends in Engineering and Applied Sciences 2 1073 -1078
Ishak , M.R.,Leman , Z.,Sapaun , S.M.,Edeerozey , A. M.M.,Othman , I.S., 2009.NSPM 2009), Universiti Putra Malaysia,Proceedings of the 9th National Symposium on Polymeric Materials -
Li , X.,Tabil , L.G.,Panigrahi , S., 2007.Chemical treatments of natural fibre use in natural fibrereinforced composites: A review,Journal of Polymer and Environment 15 25 -33
Muhamed , H.E.,Yehia , M.S.E.,Ashraf , A.M.,Muhamed , H.Z., 2015.Composites from rice straw and high density polyethylene: Thermal and mechanical properties,International Journal of Engineering Science 4 57 -64
Noranizan , I.A.,Ahmad , I., 2012.Effect of fibre loading and compatibilizer on rheological, mechanical and morphological behaviors,Open Journal of Polymer Chemistry 2 31 -41
Noorunnisa , K.P.,Abdul , K.H.P.S.,Ramachandra , R.G.,Venkata , N.S., 2011.Tensile, flexural and chemical resistance properties of sisal fibre reinforced polymer composites: effect of fibre surface treatment,Journal of Polymers and the Environment 19 115 -119
Nguyen , T.P.,Toru , F.,Bui , C.,Takashi , M.,Kazuya , O., 2012.Study on how to effectively extract bamboo fibres from raw bamboo and wastewater treatment,Journal of Material Science and Research 1 144 -155
Osorio , M.C.J.,Baracaldo , R.R.,Florez , O.J.J., 2012.The influence of alkali treatment on banana fiber's mechanical properties,Ingenieria e Investigacion 32 83 -87
Punyamurthy , R.,Sampathkumar , D.,Bennehalli , B.,Badyanki , P.V., 2014.Study of the effect of chemical treatments on the tensile behavior of abaca fibre reinforced polypropylene composites,Journal of Advances in Chemistry 10 2814 -2822
Raj , G.,Balnoiso , E.,Baley , C.,Grohens , Y., 2011.Role of polysaccharides on mechanical and adhesion properties of flax fibres in flax/PLA biocomposite,International Journal of Polymer Science 1 -11
Ramanaiah , K.,Ratna , A.V.,Reddy , K.H.C., 2012.Effect of fiber loading on mechanical properties of borassus seed shoot fibre reinforced polyester composites,Journal of Material and Environmental Science 3 374 -378
Sakthivei , M.,Romesh , S., 2013.Mechanical properties of natural fibre (banana, coir and sisal) polymer composites,Science Park 1 1 -6
Sampathkumar , D.R.,Punyamurth , R.,Venkateshappa , S.C.,Bennehalli , B., 2012.Effect of chemical treatment on water absorption of Areca fibre,Journal of Applied Research 8 5298 -5305
Saira , T.,Munawar , A.,Khan , S., 2007.Natural fibrereinforced polymer composites,Journal of Polymer Science 44 129 -144
Sanjay , M.R.,Arpitha , G.R.,Naik , L.L.,Gopalakrishna , K.,Yogesha , B., 2016.Applications of natural fibres and its composites: An overview,Natural Resources 7 108 -114
Shah , H.,Srinivasulu , B.,Shit , S., 2010.The effect of surface treatment on the properties of woven banana fabric based unsaturated polymer resin composites,International Journal of Scientific Engineering and Technology 1 86 -90
Singha , S. A.,Thakur , K.V., 2014.Fabrication and study of lignocellulosic Hibiscus sabdariffa fibre reinforced polymer composites,Bioresources 3 1173 -1186
Sinha , E.,Rout , S.K., 2009.Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composites,Bulletin of Material Science 32 65 -76
Siregar , J.P.,Sapuan , S.M.,Rahman , M.Z.A.,Zaman , H.M.D., 2010.The effect of alkali treatment on the mechanical properties of short pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites,Journal of Food, Agriculture and Environment 8 1103 -1108
Tlijania , M.,Gouadriab , A.,Benyounesc , R.,Durastantid , J.F.,Mazioude , A., 2014.Study and optimization of palm wood mechanical properties by alkalization of the natural fiber,Global Journal of Science Frontier Research: C. Biological Science 14 29 -35
Walter P.E. , Azeez,T.O. , Onukwuli O.D.,Atuanya , C.U., 2016.Effects of chemical surface modifications on Combretum dolichopetalum fiber for sustainable applications,International Journal of Engineering and Scientific Research 4 81 -96
Yang , H.S.,Kim , H.J.,Son , J.,Park , H.J.,Lee , B.J.,Hwong , T.S., 2014.Rice-husk flour filled polypropylene composites, mechanical and morphological study,Journal of Composite Structures 63 305 -312
Zhong , L.,Fu , S.,Li , F.,Zhan , H., 2010.Chlorine dioxide treatment of sisal fiber: surface lignin and its influences on fiber surface characteristics and interfacial behaviour of sisal fibre/phenolic resin composites,Bioresources Journal 5 2431 -2446
Zhong , L.B.,Wei , C.,Lv , J., 2007.Mechanical properties of sisal fibre reinforced urea-formaldehyde resin composites,Express Polymer Letters 1 681 -687
0

Citations

0

Downloads

82

Views