No Detail Found!

Benefits of Incorporating Induction Furnace Slag in Concrete as Replacement of Cement: a Case Study of Pakistan.

Author(s)
Mohammad Laeeque Ahmed Department of Civil Engineering, The University of Lahore, Lahore.
Muhammad Afzal Javed Department of Civil Engineering, The University of Lahore, Lahore.
Abdul Sami Qureshi Department of Civil Engineering, Mehran University of Engineering & Technology, Jamshoro,
Abstract
As Pakistan along with the rest of the world continues to develop, demand for limited natural resources continues to increase also. This demand for resources and subsequent waste that is generated has driven the idea of sustainability towards the forefront of modern day research. To achieve this goal, new and innovative ways are being developed to recycle waste materials that otherwise would end up in landfill sites. Slag, a by-product of steel manufacturing is one such waste material. Pakistan as being a developing country does not have proper facilities to insure safe disposal and recycling of slag. Hence, new and innovative ways for recycling slag are a necessity for Pakistan to move towards technological advancement. Current study focuses to explore the feasibility of using local induction furnace slag as partial substitute of OPC (Ordinary Portland Cement) in concrete as well as to check its performance against chloride and sulphate damage. The test results showed that 15% or more slag replacement will make the concrete immune to chloride and sulphate damage. However, results also indicate that with increase in slag replacement percentage there is a significant drop in compressive, flexural and split tensile strength of concrete. Keeping in view the loss of strength, immunity against chloride and sulphate damage, reduction in cost of making concrete and sustainability benefits; 15% slag replacement has been deemed optimum replacement value.
Publication Details
Page(s) 701-714
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 37, Issue: 4, Year: 2018

Request the full text from PASTIC

References
HamdyK.S.,Ahmed , S.E.,Ahmed , M.W., 2016.Mechanical Properties of Fly Ash Based Geopolymer Concrete with Fulland Partial Cement Replacement”,Construction and Building Materials 126 56 -565
Pedro , D.,Evangelista , L., 2017.“Evaluation of High-Performance Concrete with Recycled Aggregates: Use of Densified Silica Fume as Cement Replacement”,Construction and Building Materials 147 803 -814
Pešiae , N.,Živanoviae , S.,Garcia , R.,Papastergiou , P., 2016.Mechanical Properties of Concrete Reinforced with Recycled HDPE Plastic Fibres”,Construction and Building Materials 115 362 -370
Hendrik , G.O., 2002.Slag-Iron and Steel”,US Geological Survey Minerals Yearbook 70 1 -
SteelStatistical,Yearbook, 2016., 6 -
2017.,Some Fact about Pakistan Steel Mill, Pakistan Steel Melters Association -
2017., -
Singh , G.,Das , S.,Ahmed , A.A.,Saha , S.,Karmakar , S., 2015.Study of Granulated Blast Furnace Slag as Fine Aggregates in Concrete for Sustainable Infrastructure”,Procedia - Social and Behavioral Sciences 195 2272 -2279
October, 2018., 37 71 -2
2017.Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”, -
Khatib, J.M., and Hibbert, J.J., “Selected Engineering Properties of Concrete Incorporating Slag and Metakaolin”, Construction and Building Materials, Volume 19, No. 6, pp. 460-472, 2005.
Li, H., Wee, T.H., and Wong, S.F., “Early-Age Creep and Shrinkage of Blended Cement Concrete”, Materials Journal, Volume 99, No. 1, pp. 3-10, 2002.
Mohammed, T.U., Noor, M.A., Apurbo, S.A., Ahmed, M., Elahi, A., and Mazumder, M.H., “Utilization of Induction Furnace Slag in Concrete as Coarse Aggregate”, 1st International Conference on Engineering Research and Practice, Dhaka, Bangladesh, 2017.
ASTM C150/C150M-17, “Standard Specification for Portland Cement”, ASTM International, West Conshohocken, PA, 2017.
ASTM C430-17, “Standard Test Method for Fineness of Hydraulic Cement by the 45-mm (No. 325) Sieve”, ASTM International, West Conshohocken, PA, 2017
ASTM C33/C33M-16e1, “Standard Specification for Concrete Aggregates”, ASTM International, West Conshohocken, PA, 2016.
ASTM C989/C989M-17, “Standard Specification for Slag Cement for Use in Concrete and Mortars”, ASTM International, West Conshohocken, PA, 2017.
Granulated Blast Furnace Slag, Pakistan Steel, Ministry of Industries & Production, Government of Pakistan, 2017, http://www.paksteel.com.pk product_gran_slag.html
ACI 211.1-91, “Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete”, American Concrete Institute Committee, Volume 211, pp. 1-38, 2002.
Jakhrani, A.Q., Samo, S.R., Sobuz, H.R., Uddin, M.A., Ahsan, M.J., and Hasan, M.S., “Assessment of Dissolved Salts Concentration of Seawater in the Vicinity of Karachi”, International Journal of Structural and Civil Engineering, Volume 1, No. 2, pp. 61-69, 2012
ASTM C192/C192M-16, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory”, ASTM International, West Conshohocken, PA, 2016.
Ramezanianpour, A.A., Atarodi, S., and Sami, M., “Durability of Concretes Containing Ground Granulated Blast Furnace GGBS Against Sulfate Attack”, 3rdInternational Conference on Sustainable Construction Materials and Technologies, 2017, http:// www.claisse.info/Proceedings.htm
Arivalagn, S., “Sustainable Studies on Concrete with GGBS as a Replacement Material in Cement”, Jordan Journal of Civil Engineering, Volume 8,No. No. 3, pp. 263-270, 2014
ASTM C143/C143M-15a, “Standard Test Method for Slump of Hydraulic-Cement Concrete”, ASTM International, West Conshohocken, PA, 2015
ASTM C39/C39M-18, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens”, ASTM International, West Conshohocken, PA, 2018
ASTM C78/C78M-18, “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)”, ASTM International, West Conshohocken, PA, 2018
Özbay, E., Erdemir, M., and Durmuº, H.I., “Utilization and Efficiency of Ground Granulated Blast Furnace Slag on Concrete Properties – A Review”, Construction and Building Materials, Volume 105, pp. 423-434, 2016.
ASTM C496/C496M-17, “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”, ASTM International, West Conshohocken, PA, 2017
Worrell, E., Price, L., Martin, N., Hendriks, C., and Meida, L.O., “Carbon Dioxide Emissions from The Global Cement Industry”, Annual Review of Energy and the Environment, Volume 26, pp. 303-329, 2001
0

Citations

0

Downloads

60

Views