No Detail Found!

Effect of Temperature and Time on Nickel Aluminide Coating Deposition.

Author(s)
ALIDAD CHANDIO Department of Metallurgical Engineering, NED University of Engineering & Technology, Karachi,
Shahid Hussain Abro Department of Metallurgical Engineering, NED University of Engineering & Technology, Karachi,
Abstract
The bNiAl coating was deposited onto Nickel based CMSX-4 superalloy by in-situ CVD (Chemical Vapor Deposition) method. Main focus of this contribution was to study the influence of aluminizing time and temperature on the microstructure and thickness of the coating; this was followed by examination by XRD (X-Ray Diffraction), electron microscope. Results suggest that an incremental variation in temperature alters the coating activities from HA (High Activity) to LA (Low Activity). This is exhibited by the resultant CT (Coating Thickness) since HA coatings are thicker than LA counterparts. The microstructure of the coating formed at low temperature (or HA ones) showed a large amount of a-Cr precipitates while one formed at high temperature (or LA ones) exhibited lower amounts of such precipitates. Moreover, incremental aluminizing time showed linear trend of CT at initial stage, thereafter (10 hrs) it leveled off. Whereas it does not affect microstructure of the coating.
Publication Details
Page(s) 491-496
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 37, Issue: 4, Year: 2018

Request the full text from PASTIC

References
Clarke, D., and Levi, C., “Materials Design for the Next Generation Thermal Barrier Coatings”, Annual Review of Materials Research, Volume 33, No. 1, pp. 383-417, 2003
Bose, S., “High Temperature Coatings”, Butterworth- Heinemann, 2011
Xu, Z., Wang, Z., Jing., N., He, L., Mu, R., and Wang, K., “Effects of Deposition Temperature on the Kinetics Growth and Protective Properties of Aluminide Coatings”, Journal of Alloys and Compounds, Volume 632, pp. 238-245, 2015
Tong, L., Dengzun, Y., and Chungen, Z., “Low-Temperature Formation of Aluminide Coatings on Ni-Base Superalloys by Pack Cementation Process”, Chinese Journal of Aeronautics, Volume 23, No. 3, pp. 381-385, 2010
Zhou, Y., Zhao, C., Hao, W., Wang, X., and Xiao, P., “The Oxidation Performance for Zr-Doped Nickel Aluminide Coating by Composite Electrodepositing and Pack Cementation”, Corrosion Science, Volume 123, pp. 103-115, 2017
Cheng, W.-J., and Wang, C.-J., “Characterization of Intermetallic Layer Formation in Aluminide/Nickel Duplex Coating on Mild Steel”, Materials Characterization, Volume 69, pp. 63-70, 2012
Chandio, A.D., Zhao, X., Chen, Y., and Xiao, P., “A Study of a NiAl Bondcoat Deposited onto CMSX-4 Superalloy for Thermal Barrier Applications Developments in Strategic Ceramic Materials”, Ceramic Engineering and Science Proceedings, Volume 36, No. 8, pp. 203, 2015
Zhao, X., Cernik, B., Tang, C.C., Thompson, S.P., and Xiao, P., “Stress Evolution in a Pt-Diffused /’ Bond Coat After Oxidation”, Surface and Coatings Technology, Volume 247, pp. 48-54, 2014
Goward, G., “Protective Coatings for High Temperature Alloys State of Technology”, Proceedings of Symposium on Properties of High Temperature Alloys with Emphasis on Environmental Effects, Volume 77, No
Goward, G., and Boone, D., “Mechanisms of Formation of Diffusion Aluminide Coatings on Nickel-Base Superalloys”, Oxidation of Metals, Volume 3, No. 5, pp. 475-495, 1971.
Xiang, Z., Burnell-Gray, J.S., and Datta, P.K., “Aluminide Coating Formation on Nickel-Base Superalloys by Pack Cementation Process”, Journal of Materials Science, Volume 36, No. 23, pp. 5673-5682, 2001
Moskal, G., “Thermal Barrier Coatings: Characteristics of Microstructure and Properties, Generation and Directions of Development of Bond”, Journal of Achievements in Materials and Manufacturing Engineering, Volume 37, No. 2, pp. 323-331, 2009
Sitek, R., Bolek, T., Dobosz, R., Plocinski, T., and Mizera, J., “Microstructure and Oxidation Resistance of Aluminide Layer Produced on Inconel 100 Nickel Alloy by CVD Method”, Surface and Coatings Technology, Volume 304, pp. 584-591, 2016
Stringer, J., “Design of Coatings for High Temperature Corrosion Protection, in Surface Engineering: Surface Modification of Materials”, Kossowsky, R., and Singhal, S.C., (Editors), pp. 561-587, Springer Netherlands, Dordrecht, 1984
0

Citations

0

Downloads

44

Views