No Detail Found!

Effect of Intercritical Heat Treatment on Mechanical Properties of Plain Carbon Dual Phase Steel.

Author(s)
Imtiaz Ali Soomro Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammad Ishaque Abro Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammad Moazam Baloch Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abstract
Mechanical properties of DP (Dual Phase) steels are greatly influenced by the microstructural features such as grain size, morphology and martensite volume fraction (Vm%). These microstructural features can be altered by changing the soaking time and temperature within intercritical zone. Present study aims to study the effect of intercritical annealing temperature and soaking time on Vm% and its effects on mechanical properties of plain low carbon steel grade (AISI 1020) steel having ferritemartensitemicrostructure. Nine DP steel specimens with various amount of martensite were produced via intercritical heat treatment. Mechanical properties including TS (Tensile Strength), hardness and toughness were characterized and co-related with martensite volume fraction. It was found that increasing the intercritical annealing temperature and soaking time increases the Vm%. The optimum TS and hardness were found at 64Vm% and then decrease with further increase in Vm%. The toughness was found to have linear relationship with Vm%.  
Publication Details
Page(s) 149-158
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 37, Issue: 1, Year: 2018

Request the full text from PASTIC

Keywords
Dual Phase Microstructure, Martensite Volume Fraction Intercritical Annealing Zone.
References
January,Sarwar , M.,Manzoor , T.,Ahmad , E.,Hussain, 2007.The Role of Connectivity of Martensite on the Tensile Properties of a Low Alloy Steel”,Journal of Materials & Design 28 1928 -1933
Adamczyk , J.,Grajcar , A., 2007.Heat Treatment and Mechanical Properties of Low-Carbon Steel with DualPhase Microstructure”,Journal of Achievements in Materials & ManufacturingEngineering 22 13 -20
Chen , H.C., 2014.”Effect of Martensite Strength on the Tensile Strength of Dual Phase Steels”,Journal of Materials Science & Technology, Volume24 1991 -1994
Fallahi , A., 2014.Microstructure Properties Correlation of Dual Phase Steels Produced through Rolling Process”,Journal of Materials Science & Technology 18 451 -454
Ebrahimian , A.,Ghasemi , B.S.S., 2017.Mutual Mechanical Effects of Ferrite and Martensite in a Low Alloy FerriteMartensite Dual Phase Steel”,Journal of Alloys & Compounds 708 43 -54
Speich , G.,Miller , R., 1979.Mechanical Properties of Ferrite-Martensite Steels, Structure and Properties of Dual-Phase Steels”,TMS-AIME 145 -182
Bag , A.,Ray , K.,Dwarakadasa , E.S., 1999.Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual-Phase Steels”,Journal of Metallurgical & Materials Transactions-A 30 1193 -2002
Pierman , A.P.,Boaziz , O.,Pardeon , T.,Jaques , P.J.,Brassart , L., 2014.The Influence of Microstructure and Composition on the Plastic behavior of Dual Phase Steels”,Journal of Actamaterialia 73 298 -311
Andrews , K.W., 1965.Empirical Formulae for the Calculation of Some Transformation Temperatures”,Journal of the Iron and Steel Institute 203 721 -727
He , Y.,Rao , Q.,Tan , Y., 1996.“Investigation on the Morphology of Martensite in Carbon Steels”, 3 122 -134
Yeddu , H.K.,Phase-FieldStudy, 2012.,Ph.D. Thesis -
Sudersanan , P.D.,Nagaraj , S.,Kori , A.,Kempaiah, 2012.The Effect of Carbon Content in Martensite on the Strength of Dual Phase Steel”, 2 1 -4
Pierman, A.P., Boaziz, O., Pardeon, T., Jaques, P.J., and Brassart, L., “The Influence of Microstructure and Composition on the Plastic behavior of Dual Phase Steels”, Journal of Actamaterialia, Volume 73, pp. 298-311, 2014
Andrews, K.W., “Empirical Formulae for the Calculation of Some Transformation Temperatures”, Journal of the Iron and Steel Institute, Volume 203, pp. 721-727, 1965.
He, Y., Rao, Q., and Tan, Y., “Investigation on the Morphology of Martensite in Carbon Steels”, Journal of Central South University, Volume 3, No. 2, pp. 122-134, 1996
Yeddu, H.K., “Martensitic Transformations in Steels: A 3D Phase-Field Study”, Ph.D. Thesis, KTH Industrial Engineering & Management, Stockholm, Sweden, 2012
Sudersanan, P.D., Nagaraj, S., Kori, A., and Kempaiah, U.N., “The Effect of Carbon Content in Martensite on the Strength of Dual Phase Steel”, Volume 2, No 2, pp. 1-4, 2012.
Kajiwara, S., and Kikuchi, T., “On the Abnormally Large Tetragonality of Martensite in Fe-Ni-C alloys”, Journal of ActaMetallurgicaetMaterialia, Volume 39, No. 6, pp. 1123-1131, 1991
0

Citations

0

Downloads

51

Views