No Detail Found!

First-step Anodization of Commercial Aluminum in Oxalic Acid: Activation Energy of Rate Process and Structural Features of Porous Alumina and of Aluminum Substrate as a Function of Temperature.

Author(s)
Syed Muhammad Junaid Zaidi Department of Physics, GC University, Lahore-54000, Pakistan
Muhammad Zakria Butt Centre for Advanced Studies in Physics, GC University, Lahore 54000, Pakistan
Abstract
Summary: First-step anodization of commercial aluminium was carried out in 0.3 M oxalic acid at five temperatures -10, -5, 0, 5, and 10 ºC, keeping the anodization voltage (40 V) and time (15 min) constant. It is found that the current density, charge transferred, and thickness of porous alumina film increase exponentially with anodization temperature. The activation energy of the rate process of anodization determined from the Arrhenius plots of current density, charge transferred, and film thickness is found to be 0.357 eV with a standard deviation of 0.013 eV. Structural features of the porous alumina examined by SEM show that the pore diameter, interpore distance, and porosity increase whereas pore circularity and pore density decrease linearly with the increase in anodization temperature. Moreover, XRD studies of the anodized commercial aluminum substrate show that the intensity of diffraction peak pertaining to preferentially oriented crystallographic plane (311) is decreased whereas its full width at half maximum is increased at all anodization temperatures.
Publication Details
Page(s) 1005-1015
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 40, Issue: 6, Year: 2018

Request the full text from PASTIC

References
G. D.Sulka,K. G.Parkoła, 2007.Temperature influence on well-ordered nanopore structures grown by anodization of aluminum in sulphuric acid, Electrochim, 52 -
Y.Zuo,Y.Zhao,X.Li,N.Li,X.Bai,S. S.Qiu, 2006.Synthesis of nanowire and nanorods by anodic oxidation method, Mater, 60 -
M. P.Proenca,C. T.Sousa,D.C.Leitao,J.Ventura,J.B.Sousa,J.P.Araujo, 2008.Nanopore formation and growth in phosphoric acid Al anodization,J. Non-Cryst. Solids. 354 -
A. O.Araoyinbo,A.Rahmat,M. N.Derman,K. R. AhmadKR, 2012.Room temperature anodization of aluminum and the effect of the electrochemical cell in the formation of porous alumina films from acid and alkaline electrolytes,Adv. Mater. Lett 3 -
U.Yogeswaran,S. M.Chen, 2008.A review on the electrochemical sensors and biosensors composed of nanowires as sensing material,Sensors 8 -
Z.Huang,W.Zhang,J.Yu,D.Gao, 2007.Nanoporous alumina membranes for enhancing hemodialysis,J. Med 1 -
A. M. Abd-Elnaiem and A.,Gaber, 2013.1015 film used in fabricating nano-pores template,Int. J.Electrochem. Sci. 8 -
S.Altuntas,F.Buyukserin, 2014.Fabrication and characterization of conductive anodic aluminum oxide substrates,Appl. Surf. Sci. 318 -
M.Jayalakshmi,K.Balasubramanian, 2008.Simple capacitors to supercapacitors an overview,Int. J. Electrochem. Sci. 3 -
C. K. Chung , M. W.,Liao , H. C.,Chang and C. T.,Lee, 2011.Effects of temperature and voltage mode on nanoporous anodic aluminum oxide films by one-step anodization,Thin Solid Films 520 -
W. J.Stȩpniowski,Z.Bojar, 2011.Synthesis of anodic aluminum oxide (AAO) at relatively high temperatures. Study of the influence of anodization conditions on the alumina structural features, Surf, 206 -
C. K. Chung , W. T.,Chang , M. W.,Liao , H. C.,Chang and C. T.,Lee, 2011.Fabrication of enhanced anodic aluminum oxide performance at room temperatures using hybrid pulse anodization with effective cooling, Electrochim, 56 -
Y. M.Kim,D. H.Shin, 2009.Corrosion resistance of plasma-anodized AZ91 Mg alloy in the electrolyte with/without potassium fluoride, Mater, 50 -
S. H.Su,C. S.Li,F.Bin,M.Yokoyama, 2008.Characterization of anodic aluminum oxide pores fabricated on aluminum templates, Superlattices Microstruct, 44 -
A. W.Juyana,M. N.Derman, 2011.Characterization of porous anodic aluminium oxide film on aluminium templates formed in anodizing process,Adv. Mater. Res. 173 -
Y.Jia,H.Zhou,P.Luo,S.Luo,J.Chen,Y.Kuang, 2006.Preparation and characteristics of wellaligned macroporous films on aluminum by high voltage anodization in mixed acid,Surf. Coat. Technol 201 -
G. D.Sulka,W. J.Stepniowski, 2009.Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures, Electrochim, 54 -
M. A.Kashi,A.Ramazani, 2005.The effect of temperature and concentration on the selforganized pore formation in anodic alumina,J. Phys. D: Appl. Phys. 38 -
S. M. J.Zaidi and M. Z.,Butt, 2018.Designing low cost and low temperature electrochemical anodization setup to obtain metal oxide templates,Materials Today: Proceedings -
J. W.Diggle,T. C.Downie,C. W.Goulding, 1969.Anodic oxide films on aluminum, Chem, 69 -
Hariom , N.,Verma , K. C.,Singh, 2013.High field ionic conduction in anodic oxide films on tantalum in aqueous electrolytes,Europ. J. Appl. Engg. Sci. Res 2 -
G. E. J.Poinern,N.Ali,D.Fawcett, 2011.Progress in nano-engineered anodic aluminum oxide membrane development, 4 -
S.Zhang,Y.Wang,Y.Tan,J.Zhu,K.Liu,J.Zhu, 2016.Anodic aluminum oxide with fine pore size control for selective and effective particulate matter filtering,Mat. Res. Exp. 3 -
C. S.Barret,T. B.Massalski, 1980., 204 -
M. Z. Butt , D.,Ali , M.,Aftab and M. U.,Tanveer, 2015.Surface topography and structure of laser-treated high purity zinc, Surf, 3 -
J.Chem.Soc.Pak., 2018., 06 -
J. D. Makinson , J. S.,Lee , S. H.,Magner,R. J. De Angelis , W. N.,Weins and A. S.,Hieronymus, 2000.,Advances in X-ray Analysis 42 407 -
G. K. Williamson , W. H.,Hall, 1953.X-ray line broadening from filed aluminum and wolfram,Acta Metall 1 -
M. Z. Butt , M. W.,Khaliq , A. M.,Majeed and D.,Ali, 2016.Impact of 532 nm 6 ns laser pulses on (104) oriented zinc single crystal: surface morphology, phase transformation, and structure hardness relationship,Mat. Res. Exp 3 -
M. Z. Butt , A. M.,Majeed , M. W.,Khaliq, 2017.Mechanical Characterization of Al 5086 Alloy Irradiated with 248 nme20 ns KrF Excimer Laser,J. Alloys Compounds 695 -
M. W. Khaliq , M. Z.,Butt , and M.,Saleem, 2017.Irradiation of zinc single crystal with 500keV singly-charged carbon ions: surface morphology, structure, hardness, and chemical modifcations,Mater. Res. Express 4 -
2004.Microstructural parameters from X-ray diffraction peak broadening,Scr. Mater 51 -
0

Citations

0

Downloads

125

Views