No Detail Found!

Sustainability Assessment for Dry, Conventional and Cryogenic Machining in Face Milling of Ti-6Al-4V.

Author(s)
Imran Masood Department of Industrial Engineering, University of Engineering & Technology, Taxila, Pakistan
Mirza Jahanzaib Department of Industrial Engineering, University of Engineering & Technology, Taxila, Pakistan
Ahmad Wasim Department of Industrial Engineering, University of Engineering & Technology, Taxila, Pakistan
Abstract
Sustainability achievement in difficult-to-machine materials is major concern now-a-days. This paper presents sustainability assessment of machining titanium alloy Ti-6Al-4V. Face milling of Ti-6Al-4V hardened to 55 HRC with PVD (Physical Vapour Deposition) coated inserts was analyzed for dry, conventional and cryogenic cooling modes. Experiments were designed using CCD (Central Composite Design) for modeling and analysis of surface roughness. Feed, speed and depth of cut were used as input parameters. For a specific surface finish, the three cooling modes were compared for cutting power, machining time and material removal rate. The results indicate that cryogenic cooling was more sustainable as compared to dry and conventional cooling process. This sustainable model will help to select sustainable input parameters.
Publication Details
Page(s) 309-320
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 36, Issue: 2, Year: 2017

Request the full text from PASTIC

References
Yoshikawa, J., Boër, A., and Williams, W., “The Incoming Global Technological and Industrial Revolution Towards Competitive Sustainable Manufacturing”, CIRP Annals-Manufacturing Technology, Volume 57, pp. 641-659, France, 2008.
Zhai, Y., and Dornfeld, “A Three Dimensional System Approach for Environmentally Sustainable Manufacturing”, CIRP Annals-Manufacturing Technology, Volume 61, pp. 39-42, France, 2012.
Lee and Badrul, “Optimization for Sustainable Manufacturing Based on Axiomatic Design Principles: A case Study of Machining Processes”, Advances in Production Engineering & Management, Volume 9, pp. 31-43, Slovenia, 2014.
Hesselbach, H., Öhlschläger, B.Z., and Dettmer, “Ecologically Benign Lubricants–Evaluation from a Life Cycle Perspective”, CLEAN–Soil, Air, Water, Volume 35, pp. 427-432, Germany, 2007.
Inasaki, S.W., and Wakabayashi, “Dry Machining and Minimum Quantity Lubrication”, CIRP Annals-Manufacturing Technology, Volume 53, pp. 511-537, France, 2004
Kopac, and Pusavec, “Sustainability Spirit in Manufacturing/Machining Processes”, International Conference on Management of Engineering & Technology, PICMET., pp. 1197-1205, USA, 2009.
Westkämper, “Manufuture and Sustainable Manufacturing”, Manufacturing Systems and Technologies for the New Frontier, Springer, pp. 11-14, Japan, 2008
Ezugwu, “Key Improvements in the Machining of Difficult-to-Cut Aerospace Superalloys”, International Journal of Machine Tools and Manufacture, Volume 45, pp. 1353-1367, UK, 2005
Deshpande, P., Kopaè, M.D., and Jawahir, “Modeling and Optimization of Machining of High Temperature Nickel Alloy for Improved Machining Performance and Enhanced Sustainability”, Proceedings of 11th CIRP Conference on Modeling of Machining Operations, USA, 2008.
Devillez, D., Larrouquere, M.Z., and Vigneau, “A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy”, International Journal of Machine Tools and Manufacture, Volume 44, pp. 439-456, UK, 2004.
Ezugwu, and Bonney, “Effect of High-Pressure Coolant Supply when Machining Nickel-Base, Inconel 718, Alloy with Coated Carbide Tools”, Journal of Materials Processing Technology, Volume 153, pp. 1045-1050, Germany, 2004
Kramar, and Kopac, “High Performance Manufacturing Aspect of Hard-to-Machine Materials”, Journal of Advances in Production Engineering & Management, Volume 1, p. 2, Slovenia, 2009
Li, S.E., Iqbal, and Xiao, X., “Refrigerated Cooling Air Cutting of Difficult-to-Cut Materials”, International Journal of Machine Tools and Manufacture, Volume 47, pp. 927-933, UK, 2007.
Marksberry, “Micro-Flood (MF) Technology for Sustainable Manufacturing Operations that are Coolant Less and Occupationally Friendly”, Journal of Cleaner Production, Volume 15, pp. 958-971, Netherlands, 2007.
Marksberry, “An Assessment of Tool-Life Performance in NDM (Near Dry Machining) for Sustainable Manufacturing of Automotive Steel Components”, Dissertation, Department of Mechanical Engineering, College of Engineering, University of Kentucky, USA, 2004.
Yan, Y., and Liu, “Influence of Minimum Quantity Lubrication Parameters on Tool Wear and Surface Roughness in Milling of Forged Steel”, Chinese Journal of Mechanical Engineering, Volume 25, pp. 419-429, China, 2012.
Yildiz, and Nalbant, “A Review of Cryogenic Cooling in Machining Processes”, International Journal of Machine Tools and Manufacture, Volume 48, pp. 947-964, UK, 2008.
Jawahir, and Dillon, “Sustainable Manufacturing Processes: New Challenges for Developing Predictive Models and Optimization Techniques”, Proceedings of 1st International Conference on Sustainable Manufacturing, pp. 1-19, Canada, 2007
Ghosh, Z., and Frey, “Cryogenic Machining with Brittle Tools and Effects on Tool Life”, ASME International Mechanical Engineering Congress and Exposition, pp. 201-209, USA, 2003
Khan, D.K., and Chattopadhyay, “Effects of Cryogenic Cooling by Liquid Nitrogen Jets on Tool Wear, Surface Finish and Dimensional Deviation in Turning Different Steels”, International Journal of Machining and Machinability of Materials, Volume 1, pp. 115-131, Portugal, 2006
Silva, D., Machado, F.E., and Souza, Jr., “Performance of Cryogenically Treated HSS Tools”, Wear, Volume 261, pp. 674-685, USA, 2006.
Cus, and Balic, “Optimization of Cutting Process by GA Approach”, Robotics and Computer-Integrated Manufacturing, Volume 19, pp. 113-121, USA, 2003
Olteanu, Bisu, and Tanase, “Determination of Power Consumption in Milling,” Scientific Bulletin, Series-D, University Politehnica of Bucharest. pp. 211-220, Romania,2013.
Aramcharoen, and Chuan, “An Experimental Investigation on Cryogenic Milling of Inconel 718 and its Sustainability Assessment”, Procedia CIRP, Volume 14, pp. 529-534, France, 2014.
0

Citations

0

Downloads

48

Views