No Detail Found!

Effective Fragmentation and Flyrock Control Strategies at Quarries.

Author(s)
Sedat Esen Esen Mining Consulting, Sydney, Australia
Abstract
This paper presents the effective fragmentation and flyrock control strategies that could be applied at quarries to improve the productivity and safety. Fragmentation measurement and modelling as well as a comprehensive drill and blast audit are essential for improving the fragmentation. Face profiling and bore tracking are good tools to manage the ?as-designed? and ?as-drilled? conditions to get reasonable fragmentation from face burden zone and minimise the flyrock risk. In general, a large scatter in fragmentation data was observed at sites and the causes should be analysed by a detailed root-cause analysis technique. Two case studies were presented in this paper showing some of the effective fragmentation strategies. Finally, a flyrock model was shown to determine the safe blast exclusion zone for the mining equipment and personnel. Some key guidelines were suggested to minimise the occurrence of the flyrock.
Publication Details
Page(s) 20-28
DOI DOI not available
Published Journal: International Journal of Economic and Environmental Geology, Volume: 8, Issue: 1, Year: 2017

Request the full text from PASTIC

References
Adel , G.,Kojovic , T.,Thornton , D.,,2006,Mine-toMill Optimization of Aggregate Production,JKMRC Semi-annual Report No.4,,-
Benzer , H.,,2005,Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit,Powder Technology,150,145-154
Chavez , R.,Leclercq , F.,McClure , R.,,2007,Applying up-to-date Blasting Technology and Mine to Mill Concept in Quarries,International Society of Explosives Engineers - Annual Conference on Explosives and Blasting Technique,12,-
Chiappetta , R.,Bauer , A.,Dailey , P.,Burchell , S.,N. , Cotton,P.,,1995,Improvements in quarry blasting cost effectiveness,International Society of Explosives Engineers - Annual Conference on Explosives and Blasting Technique,,78-92
Cunningham , C. V. B.,,1983,The Kuz-Ram model for prediction of fragmentation from blasting,Proceedings of The First İnternational Symposium on Rock Fragmentation By Blasting,,439-453
Cunningham , C. V. B.,,1987,Fragmentation estimations and the Kuz-Ram model - Four years on,Proceedings of The Second İnternational Symposium on Rock Fragmentation By Blasting,,475-487
Cunningham , C.V.B.,UK,,2005,The Kuz-Ram fragmentation model-20 years on,Proc. 3rd EFEE World Conf. on Explosives and Blasting,,201-210
Dance , A.,ValeryJnr,W. , Jankovic,A. , La Rosa,D. , Esen,S.,,2006,Higher Productivity Through Cooperative Effort: A Method of Revealing and Correcting Hidden Operating Inefficiencies,International Conference on Autogenous and Semi autogenous Grinding Technology,4,375-390
Djordjevic , N.,Johannesburg,,1999,Two-component of blast fragmentation,South African Institute of Mining and Metallurgy,213,219-
Elliott , R.,Ethier , R.,Levaque , J.,,1999,Lafarge Exshaw finer fragmentation study,International Society of Explosives Engineers - Annual Conference on Explosives and Blasting Technique,,333-353
Eloranta , J.,,1995,Selection of powder factor in large diameter blastholes,EXPLO 95 Conference,,25-28
Esen , S.,La Rosa , D.,Dance , A.,Valery , W.,Jankovic , A.,,2007,Integration and optimization of Blasting and Comminution Processes,EXPLO,,95-103
Esen , S.,,2013,,Fragmentation Modeling and the Effects of ROM Fragmentation on Comminution Circuits. 23rd International Mining Congress and Exhibition of Turkey,,252-260
Fujimoto , S.,,1993,Reducing specific power usage in cement plants,World Cem.,7,,25-35
Kanchibotla , S. S.,Valery , W.,Morrell , S.,,1998,Modeling fines in blast fragmentation and its impact on crushing and grinding,Proc. Explo-99 Conf. Kalgoorlie.,,-
Kanchibotla , S. S.,Valery , W.,Morrell , S.,,1999,Modelling fines in blast fragmentation and its impact on crushing and grinding,Explo'99: A Conference on Rock Breaking,,137-144
Kanchibotla , S. S.,Valery , W.,,2010,Mine-to-mill process integration and optimization - benefits and challenges,36th Annual Conference on Explosives and Blasting Technique,,-
Katsabanis , P.,Greagsenm , S.,Pelley , C.,Kelbeck , S.,,2003,Small scale study of damage due to blasting and implications on crushing and grinding,Proceedings of the 29th Annual Conference on Explosives and Blasting Research,,234-256
Kojovic , T.,Kanchibotla , S. S.,Poetschka , N.,Chapman , J.,,1998,The effect of blast design on the lump-to-fine ratio at Marandoo iron ore operations, Proc. Mine-to-Mill Conf,,,-
Lawrance , M.,Hissem , W.,Veltrop , G.,,2009,,Missouri Quarry Productivity Improvement - Casework. International Society of Explosives Engineers - Annual Conference on Explosives and Blasting Technique,11,-
Martin , D.,,2012,Blast Vibration Modelling - An Instrument to Optimize Quarry Production,International Society of Explosives Engineers - Annual Conference on Explosives and Blasting Technique,12,-
McKee , D. J.,Chitombo , G. P.,Morrell , S.,,1995,The relationship between fragmentation in mining and comminution circuit throughput,Minerals Engineering,8,1265-1274
McKenzie , C. K.,,2009,Fly rock Range and Fragment Size Prediction,Proceedings of the 35th Annual Conference on Explosives and Blasting Technique,,-
Nielsen , K.,Kristiansen , J.,A. A.Balkema,,1996,Blasting-crushinggrinding; optimization of an integrated comminution system,Proceedings of the 5th International Symposium on Rock Fragmentation by Blasting, FRAGBLAST 5,,269-277
Richards , A. B.,Moore , A. J.,,2004,Fly rock control - by chance or design,The International Society of Explosives Engineers,,345-348
Onederra , I.,Esen , S.,Jankovic , A.,,2004,Estimation of fines generated by blasting - applications for the mining and quarrying industries,IMM transactions,113,237-247
Ouchterlony , F.,,2005,The Swebrec function: linking fragmentation by blasting and crushing,(Trans. of the Inst. of Mining and Met. A),114,A29-A44
Scott , A.,David , D.,Alvarez , O.,Veloso , L.,Proc.,,1998,Managing fines generation in the blasting and crushing operations at Cerro Colorado Mine,,,-
Simkus , R.,Dance , A.,,1998,Tracking Hardness and Size: Measuring and Monitoring ROM Ore Properties at Highland Valley Copper, Proc,,,-
Stiehr , J.,,2011,,ISEE Blasters' Handbook.18th edition. Chapter,15,-
ValeryJnr,W. , Kojovic,T. , Tapia-Vergara,F. , Morrell,S.,,1999,Optimization of blasting and sag mill feed size by application of online size analysis,IRR Crushing and Grinding Conference,,-
ValeryJnr,W. , La Rosa,D. , Jankovic,A.,,2004,Mining and Milling Process Integration and Optimization,,,-
Valery , W.,Jankovic , A.,La Rosa , D.,Dance , A.,Esen , S.,Colacioppo , J.,,2007,Process integration and optimization from mine-to-mill,Proceedings of the International Seminar on Mineral Processing Technology, India,,577-581
0

Citations

0

Downloads

53

Views