No Detail Found!

Determining an efficient solvent extraction parameters for re-refining of waste lubricating oils.

Author(s)
Hassan Ali Durrani Department of Mechanical Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammed Ibrahim Panhwar Department of Mechanical Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammed Ibrahim Panhwar Department of Mechanical Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Rafique Akthar Kazi Institute of Petroleum & Natural Gas Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abstract
Re-refining of vehicle waste lubricating oil by solvent extraction is one of the efficient and cheapest methods. Three extracting solvents MEK ((Methyl-Ethyl-Ketone), 1-butanol, 2-propanol were determined experimentally for their performance based on the parameters i.e. solvent type, solvent oil ratio and extraction temperature. From the experimental results it was observed the MEK performance was highest based on the lowest oil percent losses and highest sludge removal. Further, when temperature of extraction increased the oil losses percent also decreased. This is due to the solvent ability that dissolves the base oil in waste lubricating oil and determines the best SOR (Solvent Oil Ratio) and extraction temperatures.
Publication Details
Page(s) 265-270
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 31, Issue: 2, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

77

Views