No Detail Found!

Preparation of carbon nanotubes/epoxy resin composites by using hollow glass beads as the carrier.

Author(s)
Xiang Feng Wu School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Yong Ke Zhao School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Dan Zhang School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Tie Bing Chen School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Li Ya Ma School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Abstract
Hollow glass beads had been utilized as the carrier to assist dispersion of carbon nanotubes in epoxy resin. Hollow glass beads were firstly aminated with γ-aminopropyl-triethoxysilane, sencondly reacted with carboxyl-functionalized carbon nanotubes via an amidation reaction and susequently mixed with epoxy resin and hardener. The experimental results showed that carbon nanotubes could be loaded on the surfaces of hollow glass beads andapproximately a monolayer of carbon nanotubes was formed when the weight ratio of hollow glass beads to carbon nanotubes was 100:5. Moreover, the dispersity of carbon nanotubes in the matrix was improved as compared to the control samples prepared by using a conventional mixing method.
Publication Details
Page(s) 1539-1543
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 34, Issue: 6, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

54

Views