No Detail Found!

Production of portland cement using Moroccan oil shale and comparative study between conventional cement plant and cement plant using oil shale.

Author(s)
Mamoudou Doumbouya Laboratoire d Electrochimie et de Chimie Analytique, Département de Chimie Université Mohammed V, Faculté des Sciences, Rabat, Morocco BP, 1014 ; Laboratoires Hydrométallurgique, de Valorisation et de Traitement de minerais, Département MinesEcole Nationale de l Industrie Minérale, Rabat, Morocco BP, 753
Kacem El-Kacemi Laboratoire d Electrochimie et de Chimie Analytique, Département de Chimie Université Mohammed V, Faculté des Sciences, Rabat, Morocco BP, 1014
Said Kitane Laboratoires Hydrométallurgique, de Valorisation et de Traitement de minerais, Département MinesEcole Nationale de l Industrie Minérale, Rabat, Morocco BP, 753
Abstract
Like the use of coal ash from power plants as an addition to cement, oil shale are used for cement production on an industrial scale in Estonia, China, USA and Germany. Oil shale can be utilized in manufacturing the cement. In addition to the utilization of these byproducts after combustion, it can also reduce the required temperature for the clinkering reactions during the production of Portland clinker. We performed a study on the Moroccan oil shale to maximize the use of oil shale ash in the manufacturing of Portland cement. We found that Moroccan oil shale ash can be used up to 30% with 70% Portland clinker without altering its principle properties. The corresponding temperature required to generate the required liquid for the clinkering reactions as well as the essential ingredients for clinker was found to be around 850 to 1000°C. The operating temperatures for this optimized blend ratio were found to 1000°C. The resulting Portland clinker from this ratio will need further testing in accordance with international standards for Portland cement to examine properties like strength and setting time.
Publication Details
Page(s) 885-889
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 34, Issue: 4, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

126

Views