No Detail Found!

Modeling the effect of wider canyons on urban heating

Author(s)
Rizwan Ahmed MEMON Department of Mechanical Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Muhammad Aslam UQAILI Department of Electrical Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Ashfaque Ahmed HASHMANI Department of Electrical Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Abstract
The k-ε turbulence model is adopted in this study to simulate the impact of street canyon AR (Aspect Ratios) on heating within street canyon. The two-dimensional model was validated for RANS (Reynolds Averaged Navier Stokes) and energy transport equations. The validation process confirms that the results of the model for air-temperature and wind speed could be trusted. The application of the said model is carried out to ideal street canyons of ARs (ratio of building-height-to-street-width) from 0.4 to 2 with the same boundary conditions. Notably, street canyon aspect ratio was calculated by varying the street width while keeping the building height constant. Results show that the weighted-average-air-temperature within AR 0.4 was around 0.8% (i.e. 2.4K) higher than that within AR 2.0. Conversely, there was strong correlation (i.e., R2>0.9) between air temperature within the street canyon and street canyon AR. Results demonstrate stronger influence of vertical velocity on heating within street canyon. Evidently, increased vertical velocity decreased the temperatures. Conversely, temperatures were higher along the leeward side of the canyon in lowerARs.
Publication Details
Page(s) 255-264
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 30, Issue: 2, Year: 2011

Request the full text from PASTIC

0

Citations

0

Downloads

109

Views