The goal of the present investigation was to study the leach conditions of a low – grade bauxite in the area of Khushab district, Pakistan for local production of Al (OH)3. The chemical composition was 56.04 % Al2O3, 15.77 % Fe2O3, 19.59 % SiO2 and 3.94 % TiO2. Emphasis was placed on the effect of (CaO/Na2CO3) additives, pH and precalcination temperature on the percent recovery of Al (OH)3 and the extraction of Al2O3 from bauxite. Bauxite with the alkaline additives was fired at 550, 750 and 950 Co. The extraction efficiency of Al2O3 increased noticeably (96.58 %,97.00 % and 98.09 %) at 550, 750 and 950 Co by leaching sodium aluminate in soda – based liquor in an open system and precipitating Al (OH)3 with CO2 gas than in a reflux condensed system (73.82 %, 78.94 % and 84.28 %) and neutralizing the leach solution with acid. The Al2O3 was 90.57 %, 92.00 % and 94.16 % by precipitating Al (OH)3 from water – based liquor with CO2 gas over similar temperatures and leaching period of 25 minutes. The feasible conditions of the process were the addition of alkaline in 60 % by weight, 750 to 950 Co, precalcination temperature, 2 hours of calcination time, 25 minutes of leaching time and precipitation of Al (OH)3 from water – based liquor by carbonation.