No Detail Found!

Reinforcement of Lime Ash Particles in LDPE.

Author(s)
N Khan Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Pakistan
Z Ahmed Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Pakistan
MA Wasif Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Pakistan
A Nafees Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Pakistan
Abstract
This study presents findings from an experimental investigation on the reinforcement of Lime ash particles (LAP) synthesized from coal fly ash, CaO, and CaSO4 in Low density Polyethylene (LDPE). The Lime ash particles are synthesized by reinforcing 0 to 30 weight percentages of LAP in virgin LDPE using compression moulding. The mechanical properties of composites are studied and results showed that by adding LAP in LDPE as filler the Tensile Strength and Impact Strength of the composite decreases due to poor interfacial bonding between filler particles and LDPE but Hardness and Flexural Properties increases due to improved properties of surface.
Publication Details
Page(s) 119-123
DOI DOI not available
Published Journal: Journal of Basic and Applied Sciences, Volume: 14, Issue: 0, Year: 2018

Request the full text from PASTIC

Keywords
NULLL
References
DeArmitt C.,,2011,Functional fillers for Plasticsǁ‖ "Applied Minerals Inc, 110 Greene St,Suite,1101,,
PandianNS,,2004,Fly ash characterization with reference to geotechnical applications,Journal of Indian Institute of Science,84,189,216
M.,,2010,V Mechanical and thermal characteristics of high density polyethylene-fly ash cenopheres composites,Material and Design,,2051,2060
S.,,2014,A Characterization of LDPE Reinforced with Calcium Carbonate-Fly Ash Hybrid Filler,Journal of Minerals & Materials Characterization and Engineering,2,334,335
,2010,24038 Ahmad I. Properties of Fly Ash Filled High Density Polyethylene,Journal of Minerals & Materials Characterization and Engineering,9,183,198
IdowuIA,,2015,Effects of filler on some mechanical properties of recycled low-density polyethylene composites,Proceedings of the OAU Faculty of Technology Conference,2,2584,
Sukanya S. Mechanical Dynamic Mechanical,,2016,Thermal Characterization of Fly Ash and Nanostructured Fly Ash-Waste Polyethylene/High-Density Polyethylene Blend Composites,,,,
AtiklerU,,2006,Mechanical and Morphological properties of recycled high density polyethylene, filled with calcium carbonate and flyash,Appl Polym Sci,102,4460,
BoseS,MahanwarPA,,2004,,Effect Of Flyash On The Mechanical, Thermal, Dielectric,Rheological And Morphological Properties Of Filled Nylon 6. JMMCE,3,65,
0

Citations

0

Downloads

41

Views