No Detail Found!

Factors Causing Low Head Rice Recovery in Combine-harvested Paddy.

Author(s)
Tanveer Ahmad Agricultural and Biological Engineering Institute, National Agricultural Research Centre, Islamabad, Pakistan
Zulfiqar Ali Agricultural and Biological Engineering Institute, National Agricultural Research Centre, Islamabad, Pakistan
Hafiz Sultan Mahmood Agricultural and Biological Engineering Institute, National Agricultural Research Centre, Islamabad, Pakistan
Abstract
For paddy harvesting, old conventional wheat combine harvesters induce impact threshing forces on kernels, which result in a higher rice breakage during milling. This study was designed to identify the causes of low head rice recovery in combine-harvested Super Basmati rice grown in the Punjab province of Pakistan. Data were collected from 32 fields evaluating four types of conventional and four types of head-feeding combine harvesters. The quality of milled rice of combine-harvested paddy was compared with manually-harvested paddy. The manual harvesting and threshing gave the highest head rice recovery (64.24%) followed by head-feeding combine harvesters (62.38%). Conventional combine harvesters gave the lowest head rice recovery (58.23%). Manual harvesting method gave more shattering losses (up to 13%) due to many crop handling operations. Conventional combine harvesters gave 12% shattering losses and 7% threshing losses. Similarly, head-feeding combine harvesters gave 3.5% shattering losses and 1.5% threshing losses. Crop health was identified as an important factor yielding low head rice recovery. Healthy crop gave better head rice recovery than the medium or weak crop. Other factors yielding low head rice recovery included crop status (standing or lodged), crop moisture, machine parameters (forward speed and cylinder speed) and operator's skill. Operator's skill was perhaps the most critical factor to control rice breakage during combine harvesting of paddy crop. Head-feeding combine harvesters produced lesser broken rice than the old European wheat combine harvesters and are therefore more viable option for paddy harvesting.
Publication Details
Page(s) 84-90
Published Journal: Science, Technology and Development, Volume: 36, Issue: 2, Year: 2017

Request the full text from PASTIC

References
Ali , A.,A.Majid,H.Rehman,M.A.Sagar,,1990,Milling recovery of Basmati as affected by threshing methods and crop harvesting time,Pak. J. Agric. Res.,11,7,12
Bawatharani , R.,D.N.Jayatissal,D.A.N.Dharmasena and M.H.M.A. Bandara,,2014,Milling recovery and quality of combine harvested paddy: a case study in Batticaloa and Ampara districts,Trop. Agric. Res.,26,120,130
Feliz , D.J.,A.Proctor,M.A.Monsoor,R.L.Eason,,2005,The effects of kernel damage caused by combine harvester settings on milled-rice free fatty acid levels,J. Food Sci.,70,376,379
Geng , S.,J.F.Williams,J.E.Hill,Nov,,1984,Harvest moisture effects on rice milling quality,,,11,12
Griffin , G.A.,,1976,Fundamentals of machine operations combine harvesting,John-Deere service publication,,145,149
Hassan , M.A.,M.M. Morad , M.A.,El-Shazly and A.,Farag,,1994,Study on some operating parameters affecting the performance of combine devices with reference to grain losses,Misr. J. Agric. Eng.,11,764,780
Helmy , M.,S.M.Gomaa,F.I. Hindey,R.R.Abushieshaa,,1995,Comparative study on two different rice combine harvesting machine,Misr. J. Agric. Eng.,12,479,495
Hossain , M.F.,M.S.U.Bhuiya,M.Ahmed,M.H.Mian,,2009,Effect of harvesting time on the milling and physiochemical properties of aromatic rice,Thai J. Agric. Sci.,42,91,96
Khan , A.S.,M.Salim,,2005,Rice harvesting and threshing,Pak. J. Food Sci.,15,45,52
Malik , A.,A.Majid,S.Ahmad,,1980,Effect of different moisture levels and variety on milling quality of rice,Pak. J. Agric. Res.,1,81,85
Malik , A.,A.Majid,S.Ahmad,,1981,Effect of harvesting time and drying method on paddy yield and milling quality in different varieties,Pak. J. Agric. Res.,2,7,12
,2013,,Economic Survey of Pakistan,14,,
Mohtasebi , S.S.,M.Behroozi-Lar,J.Alidadi,K.Besharti,,2006,A new design for grain combine thresher,Int. J. Agric. Biol,8,680,683
PersonalCommunication,,2012,Personal communication with modern rice mill-owners including Guard, Engro and other rice mills managers and owners,,,,
Roy , P.,H.Okadome,N.Nakamura,T.Shiina,,2011,Processing conditions, rice properties, health and environment,Int. J. Environ. Res. Public Health,8,1957,1976
Sabir , M.S., S.H.,Malik and G.S.,Sheikh,,1990,Milling quality of combine harvested rice,Pak. J. Agric. Sci.,27,7,11
Salassi , M.E.,M.A.Deliberto,S.D.Linscombe,T.W.Walker,G.N.McCauley,D.C.Blouin,,2013,Impact of harvest lodging on rough rice milling yield and market price,,105,1860,1867
Sharma , A.D.,R.Kunze,,1982,Post dry fissure developments in rough rice,Trans. ASAE,25,465,468
Siebenmorgen , T.J.,R.C.Bautista,P.A.Counce,B.R.Wells,,2006,Optimal harvest moisture contents for maximizing rice milling quality,Rice Quality and Processing,,390,401
Srivastava , A.K.,C.E.Goering,R.P.Rohrabach,,1995,ASAE-Text Book Number 6,2nd Edition,,,
Surek , H. and N.,Beser,Agric,,1998,A research to determine the suitable rice (Oryzasativa L.) harvesting time,,22,391,394
0

Citations

0

Downloads

101

Views