No Detail Found!

Application of cormix model to the thermal discharges from power stations — a case study.

Author(s)
Zareena Kausar Engineering Hydrology Department, University College of, Dublin, Ireland
M. Mazhar Saeed Centre for Water Research, Department of Civil Engineering, University College of Dublin, Ireland
Abstract
The behaviour of the thermal water discharge from Shannon bridge Power Station (Co. Offaly. Ireland) into the river Shannon was investigated using the CORMIX model. The flow rate and temperature data measured at low flow conditions in summer were used in this study. The water quality standard of 3°C rise in ambient water temperature was used for thermal plume study. The geometry of thermal plume was simulated using different angle of discharge channel and bottom slope of the river near discharge channel. The results showed that the discharge channel geometry and depth of water at discharge point are important parameters. But the most effective parameter is the horizontal discharge angle i.e. the actual angle of discharge channel with the river bank downstream. It affects both the temperature distribution and the missing zone length. The water quality standard was obtained at a distance of 15.75 m downstream when horizontal angle of discharge was 20°. While the same standard was obtained in flow establishment zone (0.25 m downstream) with cross flow (i.e. with horizontal angle of discharge of 90°). It is proposed for Shannon bridge Power Station that the thermal water discharge from power station be normal to the downstream bank of river (cross flow). It is also suggested that define a regulatory mixing zone length of 20 m downstream in river. Shannon to keep it environmentally safe.
Publication Details
Page(s) 115-129
DOI DOI not available
Published Journal: Journal of Engineering and Applied Sciences, Volume: 17, Issue: 1, Year: 1998

Request the full text from PASTIC

0

Citations

0

Downloads

62

Views