No Detail Found!

Effect of various parameters on the dispersion of ultra fine iron ore slurry. Part-2.

Author(s)
M. I. Abro Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
A. G. Pathan Department of Mining Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Bohm Andreas Department of Mineral Processing & Petroleum Engineering, Montan University Leoben, Austria
A. H. Mallah Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Abstract
Among the list of dispersion parameters effect of solid concentration, slurry pH, stirring speed and time were studied in Part I for stablization of Dilband iron ore slurry. In Part II the study is extended to survey most appropriate dispersant and its optimal dose. In present study sodium silicate (SS), sodium hexametaphosphate (SHMP), sodium pyrophosphate (SPP), and ethylenediamine-tetraacetatic-acid (EDTA) dispersants were used. The different doses of these dispersants were studied at solid concentration 7.5%, pH 10.5, stirring speed 2000 rpm, and stirring time 5min, as optimal conditions found in PartI.Marginal improvement in slurry stabilization with addition of SS, SHMP, SPP, and EDTA was noted, however EDTA found to be most effective in stabilizing the slurry as compared to others. For the different doses of EDTA, SPP, SHMP, and SS tested, the best disperse ability was obtained at concentration of 0.135%, 0.025%, 0.2%, and 1.25% respectively.
Publication Details
Page(s) 18-22
DOI DOI not available
Published Journal: Pakistan Journal of Analytical & Environmental Chemistry, Volume: 11, Issue: 2, Year: 2010

Request the full text from PASTIC

0

Citations

0

Downloads

79

Views