Polyacrylamide (PAM) solution applied at 7, 5 and 30 mg F1 concentration to soil columns did not increase the rate of infiltration over the check. This was apparently due to the adsorption of PAM on soil particles. However, the wetting front of water moved faster in PAM treated aggregates than in the check without PAM treatment. The PAM was mixed with soil at rates of 120 and 240 ppm by weight and aggregates were made by pressing the PAM treated soil through a 2 mm sieve. The columns were packed with these air-dried aggregates. Furthermore, it was found that stability of PAM treated aggregates was significantly higher than of the untreated aggregates. The data analysis of the samples taken from a field trial at Malheur Experiment Station indicates that both gypsum and PAM increased the stability of soil structure over the check.