Metallic materials subject to loads at elevated temperatures exhibit both elastic and inelastic behaviour, the latter produced by creep effects involving either intra-granular processes or the viscous flow of the grain boundaries. This type of behaviour may be represented by mechanical models involving combinations of the following. (i) A perfectly elastic spring for elastic deformation. (ii) A dashpot consisting of a perforated piston moving in a cylinder containing a viscous liquid for inelastic deformation. These elements can be combined in different ways so that the model behaves in a way that approximates to the observed mechanical behaviour of real materials. In the present work an attempt has been made to quantify the viscoelastic behaviour of 835 M30 steel by means of mechanical models. Theoretical equations representing Standard Linear Solid have been derived. Stress relaxation data and steady state creep rates were determined experimentally for the steel. Comparison of calculated and experimental stress relaxation and creep curves was carried out. It was observed that the viscoelastic behaviour of 835 M30 steel was best represented by the Standard Linear Solid.