No Detail Found!

Study of the soil-reinforcement friction coefficient utilizing facing plate pull-out test.

Author(s)
Muhammed Soomar Khatri Civil Engineering Department, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Abstract
This paper presents and discusses the results of a facing plate pull-out test on the actual metalic strip and soil materials normally used in the construction of reinforced earthretaining walls. A conventional pull-out testing method, considering that it gives unrealistically high values of coefficient of skin friction, was modified to reduce the effect of lateral pressure which develops over the facing plate during withdrawl of a strip, which is believed to be one of the factors causing increase in the value of skin friction coefficient. The results from this modified pull-out test indicate the considerable low values of coefficient of skin friction as compared to the pull-out test and that, at high normal pressure, the values even reaches to that of a soil alone. Comparing the pulling load-displacement curves of the pull-out and facing plate pull-out tests, it is found that the latter method indicates well defined peak and residual points on the curve, and the maximum load is attained at the smaller displacement in case of the facing plate pull-out as compared to the pull-out test. The values of coefficient of skin friction from this modified method of pull-out gives higher than those of the shear box.
Publication Details
Page(s) 37-42
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 11, Issue: 2, Year: 1992

Request the full text from PASTIC

0

Citations

0

Downloads

25

Views