No Detail Found!

Density measurement within a reinforced earth retaining wall.

Author(s)
Muhammad Soomar Khatri Civil Engineering Department, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Thomas W. Finlay Civil Engineering Department, University of Glasgow, UK
Hugh B. Sutherland Civil Engineering Department, University of Glasgow, UK
Abstract
This paper presents the results of a series of in-situ density tests carried out within the fill material constituting a reinforced earth retaining wall at Mary-hill in Glasgow. The tests were done between December, 1979 and February, 1980 within a vertical section of the fill, and indicated an average dry density of 2.10 Mg/m3 within moisture content of 7.7%. The average dry density within the 2m adjacent to the facing slabs was 2.00 Mg/m3 (m.c = 8.0%) the density within the remainder being 2.14 Mg/e (m.c = 7.5%). Due to the nature of the fill material, three different methods were used to assess the density, and the results are discussed in this paper.
Publication Details
Page(s) 17-21
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 10, Issue: 4, Year: 1991

Request the full text from PASTIC

0

Citations

0

Downloads

70

Views