No Detail Found!

Power requirement of whole crop harvester.

Author(s)
Tahir Tanveer Farm Machinery Institute, National Agricultural Research Centre (NARC), Islamabad, Pakistan
Gajendra Singh Asian Institute Technology, Banghok, Thailand
Abstract
Whole crop harvester was tested in the laboratory for power consumption under no load and as an stationary thresher. Power requirements of components increase with increase in component speed. No load power requirement of harvester at a designed speed of 540 rpm was 5.4 RW. In individual components rotor three consumed maximum power followed by fan and cutter bar. The rotor three, fan and cutter bar consumed 42.6, 11.2 and 9.7 percent of total no load power respectively. The average power requirement of harvester as a stationary thresher increased with increase in feed rate. The average power requirement of harvester as an stationary thresher at a feed rate of 51 kg/minute was 9.64 KW. Rotor three requires major share of the total power input and any effort to reduce the power required by the harvester has to be concentrated on this system.
Publication Details
Page(s) 27-36
DOI DOI not available
Published Journal: Journal of Engineering and Applied Sciences, Volume: 10, Issue: 1--2, Year: 1991

Request the full text from PASTIC

0

Citations

0

Downloads

33

Views