No Detail Found!

Design of soil moisture sensor based on electromagnetic technique.

Author(s)
Taj Ali Khan Agricultural Engineering Department, NWFP University of Engineering & Technology (UET), Peshawar, Pakistan
Badruddin Agricultural Engineering Department, NWFP University of Engineering & Technology (UET), Peshawar, Pakistan
Abstract
In this research project, a soil moisture sensor was designed and developed based on electromagnetic technique that measures soil resistance as a function of soil moisture. The sensor consists of a 12-volt DC supply, a square-wave signal generator, two iron rods, sensor amplifier, rectifier and filter circuit, and measuring device. A wooden box with two iron probes fitted at its lid was used in the experiment. The sensor was calibrated in the laboratory for five different classes of soils. A square wave of 5 volts peak was passed through each of the sample at different moisture contents and the output voltage signals from the sensor were recorded. The sensor's output signal was found to be increasing linearly with increase in soil moisture. The actual moisture content of the soil was determined by oven-drying method. A simple mathematical relationship was developed to estimate soil moisture as a function of sensor's output voltage for each soil class.
Publication Details
Page(s) 43-48
DOI DOI not available
Published Journal: Journal of Engineering and Applied Sciences, Volume: 10, Issue: 1--2, Year: 1991

Request the full text from PASTIC

0

Citations

0

Downloads

45

Views