Hyderabad is situated on the wind belt extending from Karachi to Khokharaper (Pakistan). The velocity of wind at this wind belt is recorded as 30 miles per hr (max), and 5 to 7 miles per hr (min). We have fabricated a wind tube and utilized wind energy of melting of alloys in pit furnace. It is a hollow, tapered tube with three sections perpendicular to each other. As coke in the pit furnace ignites, flue gases leave furnace rapidly suction is created, enforcing the natural air to enter in furnace through the pipe at high speed due to its tapered profile. This wind tube was tested in a foundry at Kotri near Hyderabad, Pakistan and aluminum, Brass and Cast iron with high fluidity were melted in pit furnace fitted with this tube. Advantages offered are: economy of energy by eliminating the electric blower, simplicity of the operation and its utilization in under developing areas, lacking in sources of energy e.g. electric power, gas energy etc. This project has been submitted to the Sind Arid Zone Development Authority for implementation.