No Detail Found!

Adsorption studies for the removal of ammonia by thermally activated carbon.

Author(s)
Moinuddin Ghaur Department of Chemical Engineering, COMSATS Institute of Information Technology Lahore, Pakistan
Muhammad Tahir Department of Chemical Engineering, COMSATS Institute of Information Technology Lahore, Pakistan
Tauqeer Abbas Department of Chemical Engineering, COMSATS Institute of Information Technology Lahore, Pakistan
M. Shehzad Khurram Department of Chemical Engineering, COMSATS Institute of Information Technology Lahore, Pakistan
Khurram Shehzad Department of Chemical Engineering, COMSATS Institute of Information Technology Lahore, Pakistan
Abstract
The efficiency of charcoal fraction activated at temperature (°C) 50,100,150 and 200°C for 24 hr duration was investigated in this study. The results demonstrate that the adsorption of ammonia increases with the increase of contact time and adsorption process gradually reaches to equilibrium. A thirty min contact time appears to be optimal. Adsorption of ammonia also increases with the increase of adsorbent dosage and a one gram of adsorbent quantity appears to be optimal, particularly in case of charcoal fractions activated at higher temperatures. It is also evident from the results that the adsorption of ammonia increases with the increase of activation temperature. The adsorption of ammonia is particularly higher in charcoal fractions prepared at activation temperature of 200°C. The adsorption of ammonia increases with the increases in ammonia concentration. The data from experiments was applied to Freundlich and Longmuir isotherms. The data was best fitted in Freundlich equation. Empirical formula obtained indicated that thermally activated charcoal had an excellent capacity of ammonia removal.
Publication Details
Page(s) 411-414
DOI DOI not available
Published Journal: Science International, Volume: 24, Issue: 4, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

67

Views