No Detail Found!

Lateral confinement of RC short column.

Author(s)
A. Shafqat Civil Engg. Department, University of Engineering & Technology, Lahore, Pakistan
A. Ali Civil Engg. Department, University of Engineering & Technology, Lahore, Pakistan
Abstract
Columns are important structural member subjected to mainly axial forces with or without the moment whose failure leads to collapse of a structure. Under the application of load, column shortens longitudinally and expands laterally. This lateral expansion is pronounced when the stresses exceed 70% of column strength. On application of maximum axial load, the concrete crushes and the longitudinal reinforcement buckles outwards. Experimental investigations have been made by changing the conventional lateral ties of rectangular RC column core to special confinement using the equivalent area of thin steel plates. Three columns were casted using different confining steel. Experimentation was done on these columns to check the maximum axial capacity along with study of mode of failure and toughness. Experimental work on a tied column showed that strain in confining reinforcement was only 20% of main reinforcing steel strain at first peak and stress level in confining steel was only 28.45% of its yield stress for controlled column using normal ties. It is clear from above results that at the time of maximum load, stresses in confining steel are significantly lesser than its capacity. So this reserve capacity can be utilized by spreading the area of lateral reinforcement over the longitudinal steel bar in order to reduce the effective length.
Publication Details
Page(s) 371-379
DOI DOI not available
Published Journal: Science International, Volume: 24, Issue: 4, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

50

Views